3M - 7624-T-95 - 3M COLD SHRINK QT-III TERMINATION KIT 7624-T-95, TAPE/WIRE/UNISHIELDSHIELDING, 5-8.7 KV, INSULATION OD 0.83-1.53 IN, 3/KIT

ITEM #: 12913131
One-piece versatile design, allowing quick installation and accommodating a wide range of cable sizes
Cold shrink delivery system for easy installation, simply place termination over prepared cable and unwind core to shrink into place (no force fit required)
Silicone rubber insulators, EPDM stress control tubes, stress controlling compound and silicone sealing compound are compatible with all common solid dielectric insulations, such as polyethylene (PE), cross-linked polyethylene (XLPE) and ethylene propylene rubber (EPR)
Contains sufficient quantities of material to make three single-phase terminations (Lugs must be ordered separately)
3M 7260-T Series Cold shrink QT-III termination kit with high-k stress relief is designed for tape shield, wire shield and Unishield ® cables. Kit contains three high-k tracking resistances, silicone rubber terminations, three pre-formed ground braids, three constant force springs and three 1/2 Inch x 10 Inch EMI copper foil shielding tape 1181 strips. It also includes six strips Scotch ® mastic strip 2230, a cable cleaning preparation kit CC-2 and an instruction sheet. It is ideal for 5 kilo-Volts cable with 500 kcmil-750 kcmil conductor size and 8 kilo-Volts cable with 350 kcmil-700 kcmil conductor sizes. Cable has 0.83 Inch x 1.53 Inch primary insulation O.D and 1.12 Inch x 1.87 Inch jacket O.D.
Tubular termination kit is compatible with 1000 kcmil/1250 kcmil/1500 kcmil/500 kcmil/600 kcmil/700 kcmil/750 kcmil/800 kcmil and 900 kcmil conductor sizes. Erosion resistant kit has basic insulation level of 95 kilo-Volts. It offers high-K stress design that delivers lower surface stress resulting in a more compact termination. Cable insulation has outside diameter that ranges from 0.83 - 1.53 Inch. It offers high performance and easy installation when terminating outdoor and indoor medium voltage cable. Track resistant kit offers high UV stability. Kit meets IEEE standards.
3MÖ Cold Shrink QT-III Silicone Rubber Termination Kit 7620-T and 7690-T Series contains one-piece, non-skirted, silicone rubber terminations, meets IEEE Standard 48 Class 1 for indoor and weather-protected applications. The kits are designed for terminating solid dielectric shielded power cable rated 5û35 kV, with tape shield, wire shield and UniShield« constructions.