Image is an illustration, may not reflect the exact product sold.


Other products by 3M

3M - 7695-T-150 - 3M COLD SHRINK QT-III TERMINATION KIT 7695-T-150, TAPE/WIRE/UNISHIELDSHIELDING, 5-35 KV, INSULATION OD 1.05-1.80 IN, 3/KIT

  • MFR SKU: 7695-T-150
  • ITEM #: 11149141
  • 0 Reviews / 0 Questions
Lists At: $1,206.87 You Save: $114.25
9.47 % OFF
$1,092.62
Stock Status: Low Stock

ITEM #: 11149141
3MÖ Cold Shrink QT-III Silicone Rubber Termination Kit 7620-T and 7690-T Series contains one-piece, non-skirted, silicone rubber terminations, meets IEEE Standard 48 Class 1 for indoor and weather-protected applications. The kits are designed for terminating solid dielectric shielded power cable rated 5û35 kV, with tape shield, wire shield and UniShield« constructions.
Each kit contains sufficient quantities of material to make three single-phase terminations. The termination...
ITEM #: 11149141
3MÖ Cold Shrink QT-III Silicone Rubber Termination Kit 7620-T and 7690-T Series contains one-piece, non-skirted, silicone rubber terminations, meets IEEE Standard 48 Class 1 for indoor and weather-protected applications. The kits are designed for terminating solid dielectric shielded power cable rated 5û35 kV, with tape shield, wire shield and UniShield« constructions.
Each kit contains sufficient quantities of material to make three single-phase terminations. The termination assemblies consist of a tubular insulator, high dielectric constant (Hi-K) stress control tube, conformable Hi-K stress controlling compound, and built-in environmental top seal. The insulator is made of a dark gray silicone rubber with advanced tracking resistant and hydrophobic properties. Note:Lugs need to be ordered separately. Exceptions:For T-150 Kits, 150 kV impulse level meets the impulse requirements for 35 kV class equipment where indoor terminations are used. 7620-T Kits are designed and assembled with stress controlling compound only.
This listing is for Each.
Read More >>

3M - 7695-T-150 - 3M COLD SHRINK QT-III TERMINATION KIT 7695-T-150, TAPE/WIRE/UNISHIELDSHIELDING, 5-35 KV, INSULATION OD 1.05-1.80 IN, 3/KIT

  • Item #: 11149141
  • MFR SKU: 7695-T-150
  • COLD SHRINK TYPE; SHIELDED CABLE TYPE; QT-III SILICONE RUBBER TERMINATION CONTENTS; LUG (NOT INCLUDED) CONNECTOR TYPE; 5 TO 35 KILOVOLT VOLTAGE RATING; 700 TO 1500 KCMIL (5 KILOVOLT), 600 TO 1250 KCMIL (8 KILOVOLT), 500 TO 1000 KCMIL (15 KILOVOLT), 250 TO 800 KCMIL (25/28 KILOVOLT), 3/0 AWG TO 600 KCMIL (35 KILOVOLT) CONDUCTOR SIZE; 1.05 TO 1.8 INCH CABLE INSULATION OUTER DIAMETER; 150 KILOVOLT BIL RATING; NON-SKIRTED INSULATOR TYPE; SILICONE RUBBER INSULATOR MATERIAL; 3 TERMINATION(S); SHIELDING TYPE TAPE/WIRE; MAXIMUM INSTALLED LENGTH 16 INCH; APPLICATION INDOOR

There are no questions about this product yet. Be the first to ask a question.

0 out of 5 stars
5 Star
0 %
4 Star
0 %
3 Star
0 %
2 Star
0 %
1 Star
0 %

Review this product

Tell us about your personal experience

Recently Viewed Items