Toll Free
1.866.636.2487
Nickel-plated brass. For rubber and plastic tubing.
Self-closing. Brass wire. For tubes up to 2.5 cm in diameter.
Replacement Clamp , Polyoxymethylene (PXME) Acetal , TS 24/25 for Xenosep SPE Systems Apparatus.
Cast-iron construction with zinc-plated finish. Distance from center of ring to center of clamp is 108 mm (4.25").
Deep-form , round bottom with lip. Glazed except for rim. Temperatures to 1500\xc2\xb0C (max change = \xc2\xb1200\xc2\xb0C/hr).
Rubber with glass stem ground at 45\xc2\xb0 angle. Holds 25 mL Gooch Crucible. Fits filter flasks that take stopper sizes 6-8.
Precision-designed and manufactured, large-ori ce sampler and skimmer cones provide superior long-term stability and resist clogging, allowing analysis under both high and low sample-uptake conditions. Nickel is a very rugged, long-lasting material for the majority of sample types, while platinum is the material of choice for more corrosive samples. The ELAN sampler cone, with a 1.1 mm ori ce diameter, and the skimmer cone, with a 0.9 mm orifice diameter, are the largest in the industry. They have...
Linear polyethylene. Non-corrosive clamp holds buret firmly in place without obscuring graduations. Center clamp tightens to a standard support rod. Includes 1.25 cm (0.5") and 0.95 cm (0.4") bushings.
Dropper bulb slips over the end of Pasteur and other small volume pipets (approximately 1 mL). Latex.
Stainless steel , 2.8 cm (1.10") , autoclavable.
Stand Buret Support 127 X 203 Mm Base^ Stand, Buret Support, Heavy black enamel, cast iron base and zinc-plated rod, ith an 8 x 508 mm rod, 127 x 203 mm Base This listing is for Each
Replacement Collar assembly for Programmable and Non-Programmable Lab Stirrers.
Replacement aluminum Support Rod for the Heater and Support Apparatus (22744-XX). 1/2 X 24 In length.
Steam autoclavable , polypropylene molded tray has built-in handle for easy carrying of reagents or laboratory ware using one hand. Product dimenstions are 14.9 x 9.4 x 4.5" (L x W x H). Each pocket is approximately 4 inches wide.
Deep-form , round bottom with lip. Glazed except for rim. Temperatures to 1500\xc2\xb0C (max change = \xc2\xb1200\xc2\xb0C/hr).
Easy \xe2\x80\x9c1-2-3\xe2\x80\x9d operation. Squeeze the \xe2\x80\x9c1\xe2\x80\x9d valve to discharge air in top bulb. Squeeze valve \xe2\x80\x9c2\xe2\x80\x9d to draw up sample. Squeeze valve \xe2\x80\x9c3\xe2\x80\x9d to dispense. Fits all standard-sized pipets. Durable silicone for long life. Meets OSHA requirements. Accommodates pipettes up to 50mL and has a 1.4 in diameter opening.
Porcelain. Mortar has spout and is glazed outside. Pestle glazed to grinding surface. Coors.
With lip and flat porcelain handle , glazed inside and out except for rim.
Separatory Funnel Support made of Polypropylene and molded in one piece. Chuck fits rods with diameters from 8 mm to 14 mm. Ring is tapered 72-85 mm diameter.
The Corning XT Starter Ice-Free Coolers are an open-platform ice-free cooler that accommodates most CoolRack and CoolSink modules. Low profile and small footprint make them ideal for use in the hood, keeping samples cold (0.5° to 4.0°C) up to four hours. 1°C to 8°C temperature indicator provides visual assurance of temperature performance. To extend the cooling duration, keep an additional XT Cooling Core in the freezer and rotate Cores as needed. Key Features Open-platform, ice-free...
Vinyl-covered jaws operate independently of solid aluminum extension rod , 1.1-cm (0.43") diameter. Jaw capacity: 8.9 cm (3.5"). Brass pivot pin. Total length: 27.9 cm (10.9").
Dial Barometer features a large , clear , dual scale in hPa (hecto Pascal) and mm (mercury) on a 4-inch dial with wall mounts.
Replacement clamp for use with the Cold Vapor Mercury Test. Hold thermometers and other glass apparatus firmly with this lightweight , safety-adjust clamp. Holds 6.4\xe2\x80\ (1/4\xe2\x80\x931/2") diameter glass tubing/thermometers up to 178mm (7") from support rod. Tightening wing nut applies tension to the nickel-plated phosphor bronze jaws. Overall length: 210mm (81/4"). If attaching to rods , a 90\xc2\xb0 clamp holder is required. 1/pk
Support stand holds four Imhoff cones. Constructed to provide minimum interference with scale reading. Stand is 22-3/4 x 7 x 16". Heavy gauge steel.
Simple , controllable pipet filler provides easy aspiration and dispensation at variable speeds. Fits most 1-100 mL pipets. Includes a built-in filter for contamination control (can be replaced).
The Corning XT Starter Ice-Free Coolers are an open-platform ice-free cooler that accommodates most CoolRack and CoolSink modules. Low profile and small footprint make them ideal for use in the hood, keeping samples cold (0.5° to 4.0°C) up to four hours. 1°C to 8°C temperature indicator provides visual assurance of temperature performance. To extend the cooling duration, keep an additional XT Cooling Core in the freezer and rotate Cores as needed. Key Features Open-platform, ice-free...
Precision-designed and manufactured, large-orifice sampler and skimmer cones provide superior long-term stability and resist clogging, allowing analysis under both high and low sample-uptake conditions. Nickel is a very rugged, long-lasting material for the majority of sample types, while platinum is the material of choice for more corrosive samples. They have been designed to ma x imize signal stability and to minimize clogging during e x tended runs of samples containing high dissolved solids....
This blender is tough enough to handle homogenizing wastewater , sludge , soil or heavy weight food samples for superior analytical results. Both models have thick walled glass containment jars and durable , rust free stainless steel blades. Two-piece vinyl and styrene lid.
This sturdy transportation case is constructed from #1 grade plywood and zinc-plated steel ball corners. Handles , wheels and latches are recessed for protection while travelling. A foam insert keeps your Jar Tester safe. This case meets Air Transportation Association (ATA) specification 300 , category 1. Keyed lock Extra-deep tongue and groove valence Recessed rubber wheels Foam insert
This sturdy transportation case is constructed from #1 grade plywood and zinc-plated steel ball corners. Handles , wheels and latches are recessed for protection while travelling. A foam insert keeps your Jar Tester safe. This case meets Air Transportation Association (ATA) specification 300 , category 1. Keyed lock Extra-deep tongue and groove valence Recessed rubber wheels Foam insert
Precision-designed and manufactured, large-orifice sampler and skimmer cones provide superior long-term stability and resist clogging, allowing analysis under both high and low sample-uptake conditions. Nickel is a very rugged, long-lasting material for the majority of sample types, while platinum is the material of choice for more corrosive samples. They have been designed to ma x imize signal stability and to minimize clogging during e x tended runs of samples containing high dissolved solids....
Precision-designed and manufactured, large-orifice sampler and skimmer cones provide superior long-term stability and resist clogging, allowing analysis under both high and low sample-uptake conditions. Nickel is a very rugged, long-lasting material for the majority of sample types, while platinum is the material of choice for more corrosive samples. They have been designed to ma x imize signal stability and to minimize clogging during e x tended runs of samples containing high dissolved solids....