Image is an illustration, may not reflect the exact product sold.


Other products by Artesyn

Artesyn - ADO300-48S12-6LI - ADO300-48S12-6LI - Isolated Board Mount DC/DC Converter, ITE, 1 Output, 300 W, 11.77 V, 26 A (moq 224)

  • MFR SKU: ADO300-48S12-6LI
  • ITEM #: 16789187
  • 0 Reviews / 0 Questions
$100.95
Stock Status: SHIPS SOON(reserve your unit today)

ITEM #: 16789187
Product Overview

The ADO300-48S12-6LI from Artesyn Embedded Technologies is a high efficiency, single output, 300W eighth-brick converter with open frame structure and through hole pin type. It is equipped with digital PMBUS interface to allow the module configured and communicate with system controllers. This new generation digital control DC to DC converter has standard eighth-brick outline and pin configuration. It delivers up to 26A output current with 11.82VDC output voltage....
ITEM #: 16789187
Product Overview

The ADO300-48S12-6LI from Artesyn Embedded Technologies is a high efficiency, single output, 300W eighth-brick converter with open frame structure and through hole pin type. It is equipped with digital PMBUS interface to allow the module configured and communicate with system controllers. This new generation digital control DC to DC converter has standard eighth-brick outline and pin configuration. It delivers up to 26A output current with 11.82VDC output voltage. Above 95.2% ultra high efficiency and excellent thermal performance makes it an ideal choice to supply power in telecom and datacom applications. It can work under -40°C to 85°C with air cooling. The converter also features output overcurrent protection, output overvoltage protection and overtemperature protection. The output voltage line regulation of 60mV (VIN ≥ 40V) & output voltage load regulation of 250mV (VIN ≥ 40V).
  • Input voltage range from 36VDC to 75VDC (rated input voltage of 48V)
  • Output ripple of 70mVPK-PK (20MHz bandwidth)
  • Parallel with droop current sharing
  • Start-up pre-bias and switching frequency of 150KHz
  • Pin length of 3.8mm, maximum input current of 9.1 A (VIN, DC = 48VDC) & no load input current of 0.1A
  • Excellent thermal performance and power good (PG) feature
  • No minimum load requirement
  • Remote control function (negative logic, secondary remote control function option )
  • Input undervoltage lockout and input overvoltage lockout
  • IEC/EN/UL/CSA 60950, CE, UL/TUV and UL94-V0 safety approval

Applications

Power Management
Warnings
When soldering by hand, the iron temperature should be maintained at 300°C to 380°C and applied to the converter pins for less than 10s. Longer exposure can cause internal damage to the converter.
Read More >>

Artesyn - ADO300-48S12-6LI - ADO300-48S12-6LI - Isolated Board Mount DC/DC Converter, ITE, 1 Output, 300 W, 11.77 V, 26 A (moq 224)

  • Item #: 16789187
  • MFR SKU: ADO300-48S12-6LI

There are no questions about this product yet. Be the first to ask a question.

0 out of 5 stars
5 Star
0 %
4 Star
0 %
3 Star
0 %
2 Star
0 %
1 Star
0 %

Review this product

Tell us about your personal experience

Recently Viewed Items