Image is an illustration, may not reflect the exact product sold.


Other products by Bogen

Bogen - WMT1AS - Bogen Line-Matching Transformer with Speaker-Level Signal Adapter

  • MFR SKU: WMT1AS
  • ITEM #: 2654172
  • 0 Reviews / 0 Questions
Lists At: $108.06 You Save: $51.11
47.30 % OFF
$56.95
Stock Status: In Stock

ITEM #: 2654172

The line-matching transformer shall be a Bogen Model WMT1AS, or equivalent, capable of matching either inputs from, or outputs to, a 600-ohm line. It shall provide a perfect impedance match between a 600-ohm balanced line and the high-impedance input of an amplifier, or the 25V output of an amplifier. Frequency response shall be ±2 dB from 50 Hz to 20 kHz. Less than 0.1 volt across a 600-ohm line shall be required for full output power from an average amplifier (maximum level, +20 dBm)....

ITEM #: 2654172

The line-matching transformer shall be a Bogen Model WMT1AS, or equivalent, capable of matching either inputs from, or outputs to, a 600-ohm line. It shall provide a perfect impedance match between a 600-ohm balanced line and the high-impedance input of an amplifier, or the 25V output of an amplifier. Frequency response shall be ±2 dB from 50 Hz to 20 kHz. Less than 0.1 volt across a 600-ohm line shall be required for full output power from an average amplifier (maximum level, +20 dBm). Output shall be approximately 1.73 volts when connected across the 25V output tap or WMT1AS Hi-Z output connection of a Bogen amplifier.

Line input or output connections from the 600-ohm line shall be made via a three-screw terminal strip. Connection to the auxiliary input of an amplifier shall be by means of a shielded cable terminated in an RCA plug. Provisions shall be included to connect the unit to a microphone input. The WMT1AS can also adapt speaker-level signals (25V/70V systems) to a level suitable for the AUX input of an amplifier. The mounting bracket shall allow the transformer to be mounted by means of two steel screws. The unit shall measure 2" W x 2-3/8" H x 1-1/4" D and the product weight shall be 4 oz.

Read More >>

Bogen - WMT1AS - Bogen Line-Matching Transformer with Speaker-Level Signal Adapter

  • Item #: 2654172
  • MFR SKU: WMT1AS
  • Product Type: Impedance Matching Transformer
  • Product Type: Impedance Matching Transformer
  • Manufacturer Part Number: WMT1AS
  • Manufacturer Website Address: http://www.bogen.com
  • Limited Warranty: 2 Year
  • Weight (Approximate): 4 oz
  • Input Receptacles: RCA
  • Output Receptacles: Terminal Block
  • Manufacturer: Bogen Communications International, Inc
  • Product Model: WMT1AS
  • Product Name: Line-Matching Transformer with Speaker-Level Signal Adapter
  • Brand Name: Bogen
  • Brand Name: Bogen
  • Height: 2.4"
  • Width: 2"
  • Depth: 1.3"
  • Input Receptacle Type: RCA
  • Output Receptacle Type: Terminal Block

There are no questions about this product yet. Be the first to ask a question.

0 out of 5 stars
5 Star
0 %
4 Star
0 %
3 Star
0 %
2 Star
0 %
1 Star
0 %

Review this product

Tell us about your personal experience

Recently Viewed Items