Chemetrics - K-8530 - Phosphate CHEMets Kit, Vanadomolybdophosphoric Acid Method, Range: 2-30 ppm

ITEM #: 3580366
Phosphorus occurs naturally in rock formations in the earth's crust, usually as phosphate. High phosphate concentrations in surface waters may indicate fertilizer runoff, domestic waste discharge, or the presence of industrial effluents or detergents. Although phosphates from these sources are usually poly-phosphates or organically bound, all will degrade to ortho or reactive phosphates with time.
Phosphate measurement is used to control scale and corrosion inhibitor levels in boilers and cooling towers. Both methods described below measure reactive phosphate, which will give a positive reaction prior to hydrolysis, and is usually termed ortho-phosphate.
The Vanadomolybdophosphoric Acid Method
References: ASTM D 515-82, Phosphorous in Water, Test Method C. APHA Standard Methods, 23rd ed., Method 4500-P C-1999.
In test kits employing the vanadomolybdophosphoric acid method, phosphate reacts with ammonium molybdate under acid conditions and in the presence of vanadium to form a yellow-colored product. Results are e x pressed as ppm (mg/L) PO 4 .
The Stannous Chloride Method
References: APHA Standard Methods, 23rd ed., Method 4500-P D-2005.
Test kits employing this chemistry utilize a stannous chloride reduction. Phosphate reacts with ammonium molybdate and is then reduced by stannous chloride to form a blue comple x . Results are e x pressed as ppm (mg/L) PO 4 .
Phosphate CHEMets Kit, Vanadomolybdophosphoric Acid Method, Range: 2-30 ppm
This listing is for Each