CommScope - CBC426-DS-43 - Diplexer, 380960 MHz/16952690 MHz, 4.3-10 female, ( Each )

ITEM #: 11684920
Specifications
Product Classification

Product Type Diplexer
General Specifications

Product Family CBC426
Color Gray
Common Port Label ANT
Modularity 1-Single
Mounting Pole | Wall
Mounting Pipe Hardware Band clamps (2)
RF Connector Interface 4.3-10 Female
RF Connector Interface Body Style Long neck
Dimensions

Height 152 mm | 5.984 in
Width 121 mm | 4.764 in
Depth 56.5 mm | 2.224 in
Ground Screw Diameter 6 mm | 0.236 in
Mounting Pipe Diameter Range 40–160 mm
Outline Drawing

Click on image to enlarge. Close Modal
Electrical Specifications

Impedance 50 ohm
License Band, Band Pass APT 700 | AWS 1700 | CEL 850 | CEL 900 | DCS 1800 | EDD 800 | IMT 2100 | IMT 2600 | LMR 750 | LMR 800 | LMR 900 | PCS 1900 | TDD 1900 | TDD 2000 | TDD 2300 | TDD 2600 | USA 700 | USA 750 | WCS 2300
Electrical Specifications, Common Port

Composite Power, RMS 250 W
Electrical Specifications, dc Power/Alarm

dc/AISG Pass-through Method Auto sensing
dc/AISG Pass-through Path See logic table
Lightning Surge Current 10 kA
Lightning Surge Current Waveform 8/20 waveform
Voltage 7–30 Vdc
Electrical Specifications, AISG

AISG Carrier 2176 KHz ± 100 ppm
Insertion Loss, maximum 1 dB
Return Loss, minimum 15 dB
Electrical Specifications

Sub-module 1 1
Branch 1 2
Port Designation 380-960 1695-2690
License Band CEL 850, Band Pass LMR 750, Band Pass LMR 800, Band Pass USA 700, Band Pass USA 750, Band Pass AWS 1700, Band Pass PCS 1900, Band Pass WCS 2300, Band Pass
Electrical Specifications, Band Pass

Frequency Range, MHz 380–960 1695–2690
Insertion Loss, typical, dB 0.10 0.10
Total Group Delay, typical, ns 2 4
Return Loss, typical, dB 24 22
Isolation, typical, dB 65 63
Input Power, RMS, maximum, W 200 200
Input Power, PEP, maximum, W 2,000 2,000
3rd Order PIM, minimum, dBc -161 -161
3rd Order PIM Test Method 2 x 20 W CW tones 2 x 20 W CW tones
Block Diagram

Click on image to enlarge. Close Modal
Logic Table

Click on image to enlarge. Close Modal
Environmental Specifications

Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity 5%–100%
Corrosion Test Method IEC 60068-2-11, 30 days
Ingress Protection Test Method IEC 60529:2001, IP67
Packaging and Weights

Included Mounting hardware
Mounting Hardware Weight 0.6 kg | 1.323 lb
Volume 1 L
Weight, without mounting hardware 1.6 kg | 3.527 lb
Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system