CommScope - CBC4W26T-DP-43 - 3802200 MHz/23002690 MHz Twin Diplexer, DC Pass, ( Each )

ITEM #: 14140471
Specifications
Product Classification

Product Type Diplexer
General Specifications

Product Family CBC426
Color Gray
Common Port Label ANT
Modularity 2-Twin
Mounting Pole | Wall
Mounting Pipe Hardware Band clamps (2)
RF Connector Interface 4.3-10 Female
RF Connector Interface Body Style Long neck
Dimensions

Height 183 mm | 7.205 in
Width 121 mm | 4.764 in
Depth 86 mm | 3.386 in
Ground Screw Diameter 5 mm | 0.197 in
Mounting Pipe Diameter Range 42.6–122 mm
Outline Drawing

Click on image to enlarge. Close Modal
Electrical Specifications

Impedance 50 ohm
License Band, Band Pass APT 700 | AWS 1700 | CEL 850 | CEL 900 | DCS 1800 | EDD 800 | IMT 2100 | IMT 2600 | LMR 750 | LMR 800 | LMR 900 | PCS 1900 | TDD 2300 | TDD 2600 | USA 700 | USA 750 | WCS 2300
Electrical Specifications, dc Power/Alarm

dc/AISG Pass-through Method Factory set
dc/AISG Pass-through Path Branch 1 | Branch 2
Electrical Specifications, AISG

AISG Carrier 2176 KHz ± 100 ppm
Insertion Loss, maximum 0.5 dB
Return Loss, minimum 15 dB
Electrical Specifications

Sub-module 1 | 2 1 | 2
Branch 1 2
Port Designation PORT 1 380-2200 PORT 2 2300-2690
Electrical Specifications, Band Pass

Frequency Range, MHz 380–2200 2300–2690
Insertion Loss, typical, dB 0.20 0.20
Total Group Delay, maximum, ns 8 13
Return Loss, typical, dB 22 22
Isolation, minimum, dB 50 50
Input Power, RMS, maximum, W 200 200
Input Power, PEP, maximum, W 2,000 2,000
3rd Order PIM, typical, dBc -158 -158
3rd Order PIM Test Method 2 x 20 W CW tones 2 x 20 W CW tones
Block Diagram

Click on image to enlarge. Close Modal
Mechanical Specifications

Wind Loading at Velocity, frontal 11.0 N @ 150 km/h
Wind Loading at Velocity, lateral 7.0 N @ 150 km/h
Environmental Specifications

Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity 5%–100%
Corrosion Test Method IEC 60068-2-11, 30 days
Ingress Protection Test Method IEC 60529:2001, IP67
Packaging and Weights

Included Mounting hardware
Volume 1.9 L
Weight, net 4.5 kg | 9.921 lb
Weight, without mounting hardware 3.9 kg | 8.598 lb
Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system