CommScope - E15R05P19 - 700 MHz Band OneBase Tower Mounted Amplifier, ( Each )

ITEM #: 7341970
Specifications
Product Classification

Product Type 1-BTS:1-ANT (Uniplex) | Tower mounted amplifier
General Specifications

Color Gray
Modularity 2-Twin
Mounting Pole | Wall
Mounting Pipe Hardware Band clamps (4)
RF Connector Interface 7-16 DIN Female
Dimensions

Height 290 mm | 11.417 in
Width 252.5 mm | 9.941 in
Depth 162 mm | 6.378 in
Outline Drawing

Click on image to enlarge. Close Modal
Electrical Specifications

License Band, LNA USA 750
Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy Yes
Lightning Surge Current 10 kA
Lightning Surge Current Waveform 8/20 waveform
Operating Current at Voltage 140 mA @ 12 V
Operating Current Tolerance ±15 mA
Voltage 10–30 Vdc
Voltage, CWA Mode 10–18 Vdc
Alarm Current, CWA Mode 180–200 mA @ 10–18 V
Electrical Specifications, AISG

AISG Carrier 2.176 MHz ± 100 ppm
AISG Connector 8-pin DIN Female
AISG Connector Standard IEC 60130-9
Default Protocol AISG 2.0
Protocol AISG 1.1 | AISG 2.0
Voltage, AISG Mode 10–30 Vdc
Electrical Specifications

Sub-module 1 2
Branch 1 1
Port Designation ANT 0 ANT 1
AISG 2.0 Device Subunit 1.a 1.b
License Band USA 750, LNA USA 750, LNA
Electrical Specifications, Band Reject

Frequency Range, MHz 763–775 763–775
Attenuation, minimum, dB 40 40
Electrical Specifications, Rx Uplink

Frequency Range, MHz 777.5–787 777.5–787
Bandwidth, MHz 9.50 9.50
Gain, nominal, dB 13.0 13.0
Gain Tolerance, dB ±1.0 ±1.0
Gain Adjustment Range, dB 4–13 4–13
Gain Adjustment Range Increments, dB 1 1
Noise Figure, typical, dB 1.2 1.2
Noise Figure at 8 dB, typical, dB 1.5 1.5
Noise Figure at 4 dB, typical, dB 2.2 2.2
Total Group Delay, maximum, ns 330 330
Return Loss, typical, dB 24 24
Return Loss at 8 dB, typical, dB 22 22
Return Loss at 4 dB, typical, dB 20 20
Insertion Loss - Bypass Mode, typical, dB 2.3 2.3
Return Loss - Bypass Mode, typical, dB 16 16
TX Band Rejection, minimum, dB 80 80
Electrical Specifications, Tx Downlink

Frequency Range, MHz 746–756 746–756
Bandwidth, MHz 10.00 10.00
Insertion Loss, maximum, dB 0.40 0.40
Insertion Loss, typical, dB 0.35 0.35
Total Group Delay, maximum, ns 70 70
Return Loss, minimum, dB 24 24
RX Band Rejection, minimum, dB 40 40
Input Power, RMS, maximum, W 100 100
Input Power, PEP, maximum, W 1,000 1,000
5th Order PIM, maximum, dBc -150 -150
5th Order PIM Test Method 2 x 20 W CW tones 2 x 20 W CW tones
Block Diagram

Click on image to enlarge. Close Modal
Material Specifications

Finish Painted
Mechanical Specifications

Wind Loading at Velocity, maximum 75 lb/ft @ 70 mph
Wind Speed, maximum 241 km/h | 149.75 mph
Environmental Specifications

Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Corrosion Test Method IEC 60068-2-11, 30 days
Ingress Protection Test Method IEC 60529:2001, IP67
Packaging and Weights

Included Mounting hardware
Weight, net 12.5 kg | 27.558 lb