CommScope - E15Z01P17 - Diplexed TMA Dual Band 850/1900 with AISG, ( Each )

ITEM #: 9867091
Specifications
Product Classification

Product Type 1-BTS:2-ANT (Diplex) | Tower mounted amplifier
General Specifications

Color Gray
Modularity 1-Single
Mounting Pipe Hardware Band clamps (2)
RF Connector Interface 7-16 DIN Female
RF Connector Interface Body Style Long neck
Dimensions

Height 330 mm | 12.992 in
Width 184 mm | 7.244 in
Depth 74 mm | 2.913 in
Ground Screw Diameter 6 mm | 0.236 in
Mounting Pipe Diameter Range 50–120 mm
Outline Drawing

Click on image to enlarge. Close Modal
Electrical Specifications

License Band, LNA CEL 850 | PCS 1900
Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy No
Lightning Surge Current 5 kA
Lightning Surge Current Waveform 8/20 waveform
Operating Current at Voltage 240 mA @ 12 V | 70 mA @ 24 V
Operating Current Tolerance ±30 mA
Voltage 7–30 Vdc
Voltage, CWA Mode 10–18 Vdc
Alarm Current, CWA Mode 30–170 mA @ 10–18 V
Electrical Specifications, AISG

AISG Carrier 2.176 MHz ± 100 ppm
AISG Connector 8-pin DIN Female
AISG Connector Standard IEC 60130-9
Default Protocol AISG 2.0
Protocol AISG 1.1 | AISG 2.0
Voltage, AISG Mode 10–30 Vdc
Electrical Specifications

Sub-module 1 1
Branch 1 2
Port Designation ANT 850 ANT 1900
License Band CEL 850, LNA PCS 1900, LNA
Electrical Specifications, Band Reject

Frequency Range, MHz 851–856
Attenuation, minimum, dB 30
Electrical Specifications, Rx Uplink

Frequency Range, MHz 824–849 1850–1910
Bandwidth, MHz 25.00 60.00
Gain, nominal, dB 12.0 12.0
Gain Tolerance, dB +1.3/-1.0 +1.3/-1.0
Noise Figure, typical, dB 1.1 1.5
Group Delay Variation, maximum, ns 270 50
Group Delay Variation Bandwidth, MHz 5.00 5.00
Total Group Delay, maximum, ns 370 180
Output IP3, minimum, dBm 25 21
Return Loss, minimum, dB 18 18
Insertion Loss - Bypass Mode, typical, dB 3.0
Return Loss - Bypass Mode, typical, dB 18
TX Band Rejection, minimum, dB 80
Electrical Specifications, Tx Downlink

Frequency Range, MHz 869–894 1930–1990
Bandwidth, MHz 25.00 60.00
Insertion Loss, maximum, dB 0.50 0.90
Group Delay Variation, maximum, ns 25 20
Group Delay Variation Bandwidth, MHz 5.00 5.00
Total Group Delay, maximum, ns 65 60
Return Loss, minimum, dB 18 18
Input Power, RMS, maximum, W 500 300
Input Power, PEP, maximum, W 5,000 3,000
3rd Order PIM, maximum, dBc -155 -155
3rd Order PIM Test Method 2 x 20 W CW tones 2 x 20 W CW tones
Block Diagram

Click on image to enlarge. Close Modal
Material Specifications

Finish Painted
Mechanical Specifications

Wind Loading at Velocity, maximum 60 N @ 115 km/h
Environmental Specifications

Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity Up to 100%
Corrosion Test Method IEC 60068-2-11, 30 days
Ingress Protection Test Method IEC 60529:2001, IP67
Packaging and Weights

Included Mounting hardware
Weight, net 5 kg | 11.023 lb
Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
REACH-SVHC