CommScope - TMAQ23-11A - 2305-2315 MHz Quad Tower Mounted Amplifier, ( Each )

ITEM #: 8912938
Specifications
Product Classification

Product Type Tower mounted amplifier
General Specifications

RF Connector Interface 7-16 DIN Female
RF Connector Interface Body Style Long neck
Dimensions

Height 170 mm | 6.693 in
Width 270 mm | 10.63 in
Depth 90 mm | 3.543 in
Ground Screw Diameter 6 mm | 0.236 in
Outline Drawing

Click on image to enlarge. Close Modal
Electrical Specifications

License Band, LNA WCS 2300
Electrical Specifications, dc Power/Alarm

Lightning Surge Current 10 kA
Lightning Surge Current Waveform 8/20 waveform
Operating Current at Voltage 210 mA @ 12 Vdc
Alarm Current, CWA Mode 150 mA +/- 10 mA (10-18 VDC)
Electrical Specifications, AISG

AISG Carrier 2.176 MHz ± 100 ppm
AISG Connector 8-pin DIN Female
AISG Connector Standard IEC 60130-9
Protocol AISG 1.1 | AISG 2.0
Voltage, AISG Mode 10–30 Vdc
Electrical Specifications

Sub-module 1 | 2
Branch 1
Port Designation ANT 0 WCS
AISG 2.0 Device Subunit E25A01P03 1/2//3/4
License Band WCS 2300, LNA
Electrical Specifications, Rx Uplink

Frequency Range, MHz 2305–2315
Gain, nominal, dB 13.0
Gain Tolerance, dB +/-1
Noise Figure, typical, dB 1.7
Electrical Specifications, Tx Downlink

Frequency Range, MHz 2350–2360
Insertion Loss, maximum, dB 0.60
Insertion Loss, typical, dB 0.50
Total Group Delay, maximum, ns 50
Return Loss, minimum, dB 18
Return Loss, typical, dB 20
Input Power, RMS, maximum, W 200
Input Power, PEP, maximum, W 3,000
3rd Order PIM, typical, dBc -155
3rd Order PIM Test Method 2 x 20 W CW tones
Block Diagram

Click on image to enlarge. Close Modal
Environmental Specifications

Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity Up to 100%
Corrosion Test Method IEC 60068-2-11, 30 days
Ingress Protection Test Method IEC 60529:2001, IP67
Packaging and Weights

Weight, net 7.8 kg | 17.196 lb