CommScope - TMAT192123B68-21 - Twin TMA PCS/AWS/WCS with 617-894 Bypass , 4.3-10, ( Each )

ITEM #: 11599299
Specifications
Product Classification

Product Type 1-BTS:2-ANT (Diplex) | Tower mounted amplifier
General Specifications

Color Gray
Modularity 2-Twin
Mounting Pole | Wall
Mounting Pipe Hardware Band clamps (2)
RF Connector Interface 4.3-10 Female
Dimensions

Height 283 mm | 11.142 in
Width 238 mm | 9.37 in
Depth 97 mm | 3.819 in
Ground Screw Diameter 6 mm | 0.236 in
Mounting Pipe Diameter Range 40–160 mm
Outline Drawing

Click on image to enlarge. Close Modal
Electrical Specifications

License Band, Band Pass APT 700 | CEL 850 | EDD 800 | LMR 750 | LMR 800 | USA 700 | USA 750
License Band, LNA AWS 1700 | PCS 1900 | WCS 2300
Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy Yes
Lightning Surge Current 10 kA
Lightning Surge Current Waveform 8/20 waveform
Operating Current at Voltage 160mA @ 24V
Voltage 7–30 Vdc
Electrical Specifications, AISG

AISG Carrier 2.176 MHz ± 100 ppm
AISG Connector 8-pin DIN Female
AISG Connector Standard IEC 60130-9
Protocol AISG 2.0
Voltage, AISG Mode 10–30 Vdc
Electrical Specifications

Sub-module 1 | 2 1 | 2 1 | 2 1 | 2
Branch 1 2 2 2
Port Designation 617–894 AWS–PCS AWS-PCS WCS
AISG 2.0 Device Subunit E14R00P31 2/5 E14R00P31 3/6 E14R00P31 1/4
License Band CEL 850, Band Pass USA 750, Band Pass AWS 1700, LNA PCS 1900, LNA WCS 2300, LNA
Electrical Specifications, Band Pass

Frequency Range, MHz 617–894
Insertion Loss, typical, dB 0.10
Total Group Delay, typical, ns 4
Return Loss, typical, dB 22
Input Power, RMS, maximum, W 200
Input Power, PEP, maximum, W 2,000
3rd Order PIM, typical, dBc -155
3rd Order PIM Test Method 2 x 20 W CW tones
Electrical Specifications, Rx Uplink

Frequency Range, MHz 1695–1780 1850–1910 2305–2315
Bandwidth, MHz 85.00 60.00 10.00
Gain, nominal, dB 12.5 12.5 13.0
Gain Tolerance, dB ±1.5 ±1.5 ±1.0
Noise Figure, typical, dB 1.1 1.3 1.8
Total Group Delay, maximum, ns 50 150 130
Return Loss, typical, dB 20 22 22
Insertion Loss - Bypass Mode, typical, dB 1.4 2.3 2.8
Return Loss - Bypass Mode, typical, dB 18 18 18
Electrical Specifications, Tx Downlink

Frequency Range, MHz 2110–2200 1930–1990 2350–2360
Bandwidth, MHz 90.00 60.00 10.00
Insertion Loss, typical, dB 0.30 0.50 0.60
Total Group Delay, maximum, ns 20 50 50
Return Loss, typical, dB 20 22 22
Input Power, RMS, maximum, W 200 200 150
Input Power, PEP, maximum, W 2,000 2,000 1,500
3rd Order PIM, typical, dBc -155 -155
3rd Order PIM Test Method 1 x 20 W AWS CW tone 1 x 20 W PCS CW tone 2 x 20 W CW tones
Higher Order PIM, typical, dBc -155
Higher Order PIM Test Method 2 x 20 W CW tones
Block Diagram

Click on image to enlarge. Close Modal
Material Specifications

Finish Painted
Environmental Specifications

Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity Up to 100%
Corrosion Test Method IEC 60068-2-11, 30 days
Ingress Protection Test Method IEC 60529:2001, IP67
Packaging and Weights

Included Mounting hardware
Mounting Hardware Weight 1 kg | 2.205 lb
Weight, without mounting hardware 9.4 kg | 20.723 lb