CommScope - TMAT1921B68-21-43 - Twn TMA PCS/AWS1-4 w/68 Byp, 4.3-10, ( Each )

ITEM #: 11636857
Specifications
Product Classification

Product Type 1-BTS:2-ANT (Diplex) | Tower mounted amplifier
General Specifications

Color Gray
Modularity 2-Twin
Mounting Pole | Wall
Mounting Pipe Hardware Band clamps (2)
RF Connector Interface 4.3-10 Female
Dimensions

Height 231.5 mm | 9.114 in
Width 220.5 mm | 8.681 in
Depth 106 mm | 4.173 in
Ground Screw Diameter 6 mm | 0.236 in
Mounting Pipe Diameter Range 40–160 mm
Outline Drawing

Click on image to enlarge. Close Modal
Electrical Specifications

License Band, Band Pass APT 700 | CEL 850 | EDD 800 | LMR 750 | LMR 800 | USA 700 | USA 750
License Band, LNA AWS 1700 | PCS 1900
Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy Yes
Lightning Surge Current 10 kA
Lightning Surge Current Waveform 8/20 waveform
Operating Current at Voltage 240 mA @ 12 V
Voltage 7–30 Vdc
Voltage, CWA Mode 10–18 Vdc
Alarm Current, CWA Mode 30–170 mA @ 10–18 V
Electrical Specifications, AISG

AISG Carrier 2.176 MHz ± 100 ppm
AISG Connector 8-pin DIN Female
AISG Connector Standard IEC 60130-9
Default Protocol AISG 2.0
Protocol AISG 1.1 | AISG 2.0
Voltage, AISG Mode 10–30 Vdc
Electrical Specifications

Sub-module 1 | 2 1 | 2 1 | 2
Branch 1 2 3
Port Designation 555–894 AWS–PCS AWS–PCS
AISG 2.0 Device Subunit E14R00P09 2/4 E14R00P09 1/3
License Band APT 700, Band Pass CEL 850, Band Pass EDD 800, Band Pass LMR 750, Band Pass LMR 800, Band Pass USA 750, Band Pass AWS 1700, LNA PCS 1900, LNA
Electrical Specifications, Band Pass

Frequency Range, MHz 555–894
Insertion Loss, typical, dB 0.10
Total Group Delay, typical, ns 4
Return Loss, typical, dB 22
Isolation, minimum, dB 50
Input Power, RMS, maximum, W 200
Input Power, PEP, maximum, W 3,000
3rd Order PIM, typical, dBc -156
3rd Order PIM Test Method 2 x 20 W CW tones
Electrical Specifications, Rx Uplink

Frequency Range, MHz 1695–1780 1850–1910
Bandwidth, MHz 85.00 60.00
Gain, nominal, dB 12.0 12.0
Gain Tolerance, dB ±1.2 ±1.2
Noise Figure, typical, dB 1.0 1.3
Total Group Delay, typical, ns 30 110
Return Loss, typical, dB 22 22
Insertion Loss - Bypass Mode, typical, dB 1.3 2.2
Return Loss - Bypass Mode, typical, dB 16 16
TX Band Rejection, minimum, dB 60 60
Electrical Specifications, Tx Downlink

Frequency Range, MHz 2110–2200 1930–1990
Bandwidth, MHz 90.00 60.00
Insertion Loss, typical, dB 0.15 0.45
Total Group Delay, typical, ns 10 35
Return Loss, typical, dB 22 22
RX Band Rejection, minimum, dB 55 45
Input Power, RMS, maximum, W 200 200
Input Power, PEP, maximum, W 3,000 3,000
3rd Order PIM, typical, dBc -156 -156
3rd Order PIM Test Method 1 x 20 W AWS CW tone 1 x 20 W PCS CW tone 2 x 20 W CW tones
Block Diagram

Click on image to enlarge. Close Modal
Material Specifications

Finish Painted
Environmental Specifications

Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity Up to 100%
Corrosion Test Method IEC 60068-2-11, 30 days
Ingress Protection Test Method IEC 60529:2001, IP67
Packaging and Weights

Included Mounting hardware
Mounting Hardware Weight 0.9 kg | 1.984 lb
Weight, without mounting hardware 7.1 kg | 15.653 lb