CommScope - TMAT21-11-43 - Tower Mounted Amplifier, Twin AWS 1-4 with AISG, ( Each )

ITEM #: 13806252
Specifications
Product Classification

Product Type 1-BTS:1-ANT (Uniplex) | Tower mounted amplifier
General Specifications

Color Gray
Modularity 2-Twin
Mounting Pole | Wall
Mounting Pipe Hardware Band clamps (2)
RF Connector Interface 4.3-10 Female
RF Connector Interface Body Style Long neck
Dimensions

Height 161 mm | 6.339 in
Width 196 mm | 7.717 in
Depth 78 mm | 3.071 in
Ground Screw Diameter 5 mm | 0.197 in
Mounting Pipe Diameter Range 40–160 mm
Outline Drawing

Click on image to enlarge. Close Modal
Electrical Specifications

License Band, LNA AWS 1700
Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy Yes
Lightning Surge Current 20 kA
Lightning Surge Current Waveform 8/20 waveform
Operating Current at Voltage 100 mA @ 12 V
Operating Current Tolerance ±20 mA
Voltage 7–30 Vdc
Voltage, CWA Mode 10–18 Vdc
Alarm Current, CWA Mode 190 mA ±10 mA
Electrical Specifications, AISG

AISG Connector 8-pin DIN Female
AISG Connector Standard IEC 60130-9
Protocol AISG 2.0
Voltage, AISG Mode 10–30 Vdc
Electrical Specifications

Sub-module 1 | 2
Branch 1
Port Designation ANT
License Band AWS 1700, LNA
Electrical Specifications, Band Pass

Sub-module 1 | 2
Higher Order PIM, typical, dBc -161
Higher Order PIM Test Method 2 x 20 W CW tones
Electrical Specifications, Rx Uplink

Frequency Range, MHz 1695–1780
Gain, nominal, dB 12.0
Gain Tolerance, dB ±1
Noise Figure, typical, dB 1.2
Total Group Delay, maximum, ns 35
Output IP3, minimum, dBm 22
Return Loss, typical, dB 21
Insertion Loss - Bypass Mode, typical, dB 1.7
Return Loss - Bypass Mode, typical, dB 17
Electrical Specifications, Tx Downlink

Frequency Range, MHz 2110–2200
Insertion Loss, typical, dB 0.20
Total Group Delay, maximum, ns 10
Return Loss, typical, dB 21
Input Power, RMS, maximum, W 200
Input Power, PEP, maximum, W 2,000
Block Diagram

Click on image to enlarge. Close Modal
Material Specifications

Finish Painted
Environmental Specifications

Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity Up to 100%
Corrosion Test Method IEC 60068-2-11, 30 days
Ingress Protection Test Method IEC 60529:2001, IP67
Packaging and Weights

Included Mounting hardware
Weight, without mounting hardware 3.4 kg | 7.496 lb
Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system