CommScope - TMAT7UC8-11V - Twin Compact TMA 700uC/850MHz, Diplexed BTS/ANT, ( priced per 3 Each )

ITEM #: 12213083
Specifications
Product Classification

Product Type 1-BTS:1-ANT (Uniplex) | Tower mounted amplifier
General Specifications

Color Gray
Modularity 2-Twin
Mounting Pole | Wall
Mounting Pipe Hardware Band clamps (4)
RF Connector Interface 7-16 DIN Female
RF Connector Interface Body Style Long neck
Dimensions

Height 291 mm | 11.457 in
Width 251 mm | 9.882 in
Depth 158 mm | 6.22 in
Ground Screw Diameter 6 mm | 0.236 in
Mounting Pipe Diameter Range 40–160 mm
Outline Drawing

Click on image to enlarge. Close Modal
Electrical Specifications

License Band, LNA CEL 850 | USA 750
Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy Yes
Lightning Surge Current 10 kA
Lightning Surge Current Waveform 8/20 waveform
Operating Current at Voltage 240 mA @ 12 V
Operating Current Tolerance ±20 mA
Voltage 7–30 Vdc
Voltage, CWA Mode 10–18 Vdc
Alarm Current, CWA Mode 30–170 mA @ 10–18 V
Electrical Specifications, AISG

AISG Carrier 2.176 MHz ± 100 ppm
AISG Connector 8-pin DIN Female
AISG Connector Standard IEC 60130-9
Protocol AISG 2.0
Voltage, AISG Mode 10–30 Vdc
Electrical Specifications

Sub-module 1 | 2 1 | 2
Branch 1 2
Port Designation ANT ANT
AISG 2.0 Device Subunit E15R02P57 1/2 E15R02P57 1/2
License Band USA 750, LNA CEL 850, LNA
Electrical Specifications, Band Reject

Frequency Range, MHz 763–775 851–856
Attenuation, minimum, dB 27 20
Electrical Specifications, Rx Uplink

Frequency Range, MHz 777.5–787 824–849
Gain, nominal, dB 13.0 13.0
Gain Tolerance, dB ±1.0 +1.3/-1.0
Gain Adjustment Range, dB 4-13 4-13
Gain Adjustment Range Increments, dB 1 1
Noise Figure, typical, dB 1.4 1.4
Noise Figure at 8 dB, typical, dB 1.7 1.7
Noise Figure at 4 dB, typical, dB 2.4 2.4
Group Delay Variation, maximum, ns 160 150
Group Delay Variation Bandwidth, MHz 5.00 5.00
Return Loss, typical, dB 24 24
Return Loss at 8 dB, typical, dB 22 22
Return Loss at 4 dB, typical, dB 20 20
Insertion Loss - Bypass Mode, typical, dB 2.0 2.2
Return Loss - Bypass Mode, typical, dB 18 18
Electrical Specifications, Tx Downlink

Frequency Range, MHz 746–756 869–894
Insertion Loss, typical, dB 0.35 0.35
Return Loss, typical, dB 24 24
Input Power, RMS, maximum, W 200 200
Input Power, PEP, maximum, W 2,000 2,000
3rd Order PIM, typical, dBc -161
3rd Order PIM Test Method 2 x 20 W CW tones
7th Order PIM, minimum, dBc -161
Block Diagram

Click on image to enlarge. Close Modal
Material Specifications

Finish Painted
Environmental Specifications

Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity Up to 100%
Corrosion Test Method IEC 60068-2-11, 30 days
Ingress Protection Test Method IEC 60529:2001, IP67
Packaging and Weights

Included Mounting hardware
Weight, net 12.5 kg | 27.558 lb