Cooper Bussmann / Eaton Electric - ECNR225 - Edison ECNR225 Bullet Time-Delay Fuse; Class RK5, 225 Amp, 250 Volt AC, Blade End

ITEM #: 11678708
Size: 2.380 Inch Diameter x 8.630 Inch Length
Helps protect motors against burnout from overloads
Helps protect motors against burnout from single phasing on three-phase systems
The overload element provides protection against low level overcurrent of overloads and will hold an overload which is five times greater than the amp rating of the fuse for a minimum of ten seconds
Edison Bullet® ECNR Series Dual element time delay fuse helps to protect motors against burnout from 1-Phasing on 3-Phase systems and overloads. Fuse has a time delay of 10 seconds at 500% rated current. It is rated at a voltage of 250 VAC, 150 VDC and current of 225 Amps. Fuse helps to simplifies/improves blackout prevention and provides motor overload, ground fault, short-circuit protection. It measures 2.380 Inch diameter x 8.630 Inch. Fuse is highly recommended for AC power distribution system mains, feeders and branch circuits. Dual-element fuse can be applied in circuits subject to temporary motor overloads and surge currents to provide both high performance short-circuit/overload protection.
Time delay fuse features overload element that helps to provide protection against low level overcurrent of overloads and will hold an overload which is five times greater than the current rating of the fuse for a minimum of ten seconds. Fuse is CE/CSA certified and UL listed.
Bullet Fuse, 225A, RK5, Blade end X blade end, 2.38, IN, 200 kAIC, Superior overload and cycling capabilities, Time delay, Current-limiting, 250 Vac, 125 Vdc, Dual, 10s at 500%