Image is an illustration, may not reflect the exact product sold.


Other products by Cytiva

Cytiva - 2804T - Polycap TF 150, 1.0 µm, with FNPT inlet and outlet (5 pcs)Item must be purchased in units of 1

  • MFR SKU: 2804T
  • ITEM #: 18516998
  • 0 Reviews / 0 Questions
$1,230.00
Stock Status: In Stock

ITEM #: 18516998
Whatman Polycap TF capsule filters from are made with durable, hydrophobic polytetrafluoroethylene (PTFE) membranes in a polyproplyene housing for use with organic solvents and chemically aggressive solutions.
  • PTFE filter membrane is resistant to most solvents
  • Available in 0.1, 0.2, 0.45, and 1.0 µm pore sizes
  • 1.0 µm pore size capsules used for extended life and filtration of highly contaminated solutions
  • Manufactured according to ISO9001:2008 QMS standards...
ITEM #: 18516998
Whatman Polycap TF capsule filters from are made with durable, hydrophobic polytetrafluoroethylene (PTFE) membranes in a polyproplyene housing for use with organic solvents and chemically aggressive solutions.
  • PTFE filter membrane is resistant to most solvents
  • Available in 0.1, 0.2, 0.45, and 1.0 µm pore sizes
  • 1.0 µm pore size capsules used for extended life and filtration of highly contaminated solutions
  • Manufactured according to ISO9001:2008 QMS standards
  • Autoclavable capsule filtration device if sterility is required

business offers a variety of Whatman Polycap filter options beyond PTFE filter membrane media. Browse the Whatman range to find the right capsule filter for your application. Whatman Polycap filter for aggressive solvents

Filtration of organic solvents and aggressive solutions requires a durable membrane for filtration without sample contamination.
Autoclavable Polycap TF capsule filters feature PTFE membranes with high chemical resistance. Common applications include venting, in-line filtration to sterilize* and remove particles from air/gas/liquid streams, filtration to ensure clean inert gases in vial filling lines, and isolation of exhaust from fermenters.
Polycap TF filters support use in the electronics, pharmaceutical, and biopharmaceutical industries, because they are photoresistant and can be used to vent and perform in-line filtration for production systems in biological environments.
*Refers to sterilization by filtration for small sample use which is an industry term for filters of pore size 0.2 um or smaller as referenced in guidance such as EPA Guidance for Industry Sterile Drug Products Produced by Aseptic Processing — Current Good Manufacturing Practice Section IX, Part B (September 2004).
Read More >>

Cytiva - 2804T - Polycap TF 150, 1.0 µm, with FNPT inlet and outlet (5 pcs)Item must be purchased in units of 1

  • Item #: 18516998
  • MFR SKU: 2804T
  • Housing: Polypropylene (PP)
  • Operating pressure max.: 4.1 bar (60 psi)
  • Vent: On inlet
  • Flow Direction: Supported bidirectionally. Certain applications may require orientation, i.e., vents. Reverse flow only for low pressure applications.
  • Sterilization: May be autoclaved at 121° C for 20 minutes. Multiple autoclave cycles are possible. However, the responsibility for reuse is with the operator. The device should be protected from cross contamination. An integrity test should be performed after autoclaving.Compatible with EtO sterilization.
  • Sealing: Heat-fused
  • Support System: Polypropylene (PP)
  • Dimensions: 150 mm
  • Pore Size: 1 µm
  • Inlet Connector: Female national pipe thread (FNPT)
  • Outlet Connector: Female national pipe thread (FNPT)

There are no questions about this product yet. Be the first to ask a question.

0 out of 5 stars
5 Star
0 %
4 Star
0 %
3 Star
0 %
2 Star
0 %
1 Star
0 %

Review this product

Tell us about your personal experience

Recently Viewed Items