Desco - 19290 - 19290 - ESD Tester, OLED, 10 %, 8.27 ", 3.94 "

ITEM #: 13178768
NEW Large OLED Display Displays resistance mantissa and exponent, temperature, relative humidity and test voltage NEW Internal Memory Stores and recalls up to 100 measurements. Captures resistance, temperature, humidity and test voltage. NEW Measurement Stability Modes Sets the 15-second electrification period for test requirements* NEW Electrode Spacers Spaces the 5 lbs. electrodes to 10 and 36 inches for resistance point-to-point (Rtt) measurement requirements of ANSI/ESD S.1 and ANSI/ESD S4.1 NEW Measurement Location Labels (Pack of 25) Labels and tracks areas and materials measured for surface resistance Digital Compliance Verification Surface Resistance Meter Kit Measures resistance point-to-point (Rtt) and resistance-to-ground (Rtg) of worksurfaces, flooring systems, garments, packaging, and other materials in accordance with ESD Association documents: ESD TR53, ANSI/ESD S4.1, ANSI/ESD S7.1, ANSI/ESD STM97.1 and others Resistance Range: 1.0 x 10on3 to 1.0 x 10on12 Ohms Determines if a surface is conductive, dissipative or insulative for ESD control applications in electronics manufacturing or handling environments Under Load Test Voltages (10V or 100V 5%) Meets ANSI/ESD resistance testing requirements for product qualification and compliance verification 50005Concentric Ring Probe Accessory Measures surface resistance per ANSI/ESD and volume resistance per ANSI/ESD of planar material NEW19295 Handheld Electrode Accessory Meets resistance measurement requirements of TR53, ANSI/ESD STM97.1 and other documents NIST Calibrated - Original Calibration Certificate can be Downloaded Here Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of products, see Calibration. Made in the United States of America This item is made and stocked inChino, CA Kit Includes: 1 Digital Surface Resistance Meter 2 Test Leads, 5' Length 2 5 lbs. Electrodes 1 Electrode Spacer, 10" 1 Electrode Spacer, 36" 4 AA Alkaline Batteries 1 Ground Plug Adapter 1 Gator Clip 25 Measurement Location Labels 1 Plastic Carrying Case 1 Certificate of Calibration *Measurement Stability Modes: Auto Stabilizationenables a 15-second electrification period when the measured resistance is 1 x 10on10 ohms or greater to maintain test accuracy. Fixed Stabilizationcomplies with ANSI/ESD S4.1 and enables a 15-second electrification period when the measured resistance is 1 x 10on6ohms or greater. This list is for Each.