Desco - 770761 - 770761 - ESD Tester, OLED, 10 %, 210 mm, 100 mm

ITEM #: 14273759
Large OLED Display Displays resistance mantissa and exponent, temperature, relative humidity and test voltage Internal Memory Stores and recalls up to 100 measurements. Captures resistance, temperature, humidity and test voltage. Measurement Stability Modes Sets the 15-second electrification period for test requirements* Digital Compliance Verification Surface Resistance Meter Measures resistance point-to-point (Rtt) and resistance-to-ground (Rtg) of worksurfaces, flooring systems, garments, packaging, and other materials in accordance with ESD Association documents: ESD TR53, ANSI/ESD S4.1, ANSI/ESD S7.1, ANSI/ESD STM97.1 and others Resistance Range: 1.0 x 10on3 to 1.0 x 10on12 Ohms Determines if a surface is conductive, dissipative or insulative for ESD control applications in electronics manufacturing or handling environments Under Load Test Voltages (10V or 100V 5%) Meets ANSI/ESD resistance testing requirements for product qualification and compliance verification 770007Concentric Ring Probe Accessory Measures surface resistance per ANSI/ESD and volume resistance per ANSI/ESD of planar material 770765Handheld Electrode Accessory Meets resistance measurement requirements of TR53, ANSI/ESD STM97.1 and other documents NIST Calibrated - Original Calibration Certificate can be Downloaded Here Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of SCS products, see Calibration. Made in the United States of America This item is made and stocked inChino, CA *Measurement Stability Modes: Auto Stabilization enables a 15-second electrification period when the measured resistance is 1 x 10on10 ohms or greater to maintain test accuracy. Fixed Stabilization complies with ANSI/ESD S4.1 and enables a 15-second electrification period when the measured resistance is 1 x 10on6 ohms or greater. This list is for Each.