Image is an illustration, may not reflect the exact product sold.


Other products by Eaton Electrical

Eaton Electrical - DH361FGK - Eaton / Cutler Hammer DH361FGK 3-Wire Fusible Heavy-Duty Safety Switch; 600 Volt AC/250 Volt DC, 30 Amp, 3-Pole, NEMA 1

  • MFR SKU: DH361FGK
  • ITEM #: 10901688
  • 0 Reviews / 0 Questions
$260.90
Stock Status: In Stock

ITEM #: 10901688
Size: 8.130 Inch Length x 10 Inch Width x 15.880 Inch Height
Deionizing arc chutes, arc chutes confine and suppress the arcs produced by opening contacts under load
Mechanically interlocked cover to prevent easy access when the switch is in the On position
Clearly visible palm fitting red handle
Suitable for service entrance applications
Eaton / Cutler Hammer 3-Pole Fusible heavy-duty safety switch is used to open or close an electrical circuit. It is rated at 600...
ITEM #: 10901688
Size: 8.130 Inch Length x 10 Inch Width x 15.880 Inch Height
Deionizing arc chutes, arc chutes confine and suppress the arcs produced by opening contacts under load
Mechanically interlocked cover to prevent easy access when the switch is in the On position
Clearly visible palm fitting red handle
Suitable for service entrance applications
Eaton / Cutler Hammer 3-Pole Fusible heavy-duty safety switch is used to open or close an electrical circuit. It is rated at 600 VAC and 30 Amps current. It uses customer installed fuse for protecting circuits from short-circuits/over current. Switch has k-series design that uses double-break, rotary blade action for high performance and reliability. It is constructed from corrosion resistant painted steel for durability. It is padlockable to avoid unauthorized entry. Switch has ample wiring space and bolt-on hub for quick installation. It is rated for maximum power of 7.5 hp/10 hp at 1-Phase 480/600 VAC and 15 hp/20 hp at 3-Phase 480/600 VAC. It meets NEMA 1 indoor enclosure standards. It measures 8.130 Inch x 10 Inch x 15.880 Inch. Switch is UL listed.
Eaton Custom single-throw fused safety switch, 30 A, NEMA 1, Painted steel, Class H, Fusible without neutral, Three-pole, Three-wire, 600 V, Max Hp: 7.5, 10/ 15, 20 hp (1/3PH @480, 600 V), #14-#2 Cu/Al
Read More >>

Eaton Electrical - DH361FGK - Eaton / Cutler Hammer DH361FGK 3-Wire Fusible Heavy-Duty Safety Switch; 600 Volt AC/250 Volt DC, 30 Amp, 3-Pole, NEMA 1

  • Item #: 10901688
  • MFR SKU: DH361FGK
  • Poles: 3
  • Volts DC: 250
  • Mounting: Surface
  • IP/NEMA Rating: 1
  • Amps: 30
  • Volts AC: 600

There are no questions about this product yet. Be the first to ask a question.

0 out of 5 stars
5 Star
0 %
4 Star
0 %
3 Star
0 %
2 Star
0 %
1 Star
0 %

Review this product

Tell us about your personal experience

Recently Viewed Items