Eaton Electrical - DS7-342SX032N0-N - DS7-342SX032N0-N - Motor Starter, DS7 Series, Soft, Three Phase, 25 hp, 32 A, 200 to 480 VAC, 110-230 VAC Control

ITEM #: 8353114
LED displays device status and provides fault indication
Compact in design
CSA certified
UL listed
Eaton / Cutler Hammer 3-Phase reduced voltage solid-state standard soft start controller is suitable to control the acceleration and deceleration of three-phase motors. The Generation 7 series controller is very compact, multi-functional, easy to install and commission. The soft start controller adjusts initial torque and protects motors and critical loads. The controller has current rating of 32 Amps in four frame sizes. Standard soft starter has voltage rating of 400 Volts and frequency rating of 50/60 Hz. It measures 3.66 Inch x 6.89 Inch x 5.47 Inch. It withstands the temperature of range 0 to 40 degree Celsius. It is suitable for controlling peak inrush current to the motor. Controller has coil voltage rating of 110/230 VAC. It has torque of 11 Inch-lb. It can accommodate solid or stranded wire of size 18 - 6 AWG. It has bypass relay that connects the motor to the line and improves system efficiency by reducing internal power losses. The LED displays device status and offers fault indication. It offers protection to device against overheating and maximizes its life in the enclosure. Soft start controller is UL listed, CSA certified, CE marked, C-Tick and meets IEC/EN standards.
DS7 soft start controller, 23 second ramp, one start per hour, 300% current limit at 40¦C, 32A, 5 hp at 200V, 10 hp at 230V, 20 hp at 480V, HFD3070 max breaker, 50A Class RK5 max fuse