Eaton Electrical - FMV13LCY/UNV176 - Cooper Crouse-Hinds FMV13LCY/UNV1-76 Champ LED Flood Light; 179 Watt, 12940 Lumens, Epoxy Powder-Coated

ITEM #: 11193723
Dimension: 21.750 Inch Length x 21 Inch Width
Instant illumination and restrike
Better visibility with crisp and white light
Minimum T4 temperature rating - safely operate in the most hazardous environments and any non-hazardous location
Cold temperature operation/no warm-up required
No lights out feature - if a single LED fails, others will remain lit from other drivers - minimum 50% output maintained
Terminals - 3 x 6 Sq mm for IEC version
Compact modular fixture attaches onto existing SFA6 and SWB6 for easy installation
Crouse-Hinds Champ® FMV Series LED Flood light fixture measuring 21.750 Inch x 21 Inch features a copper-free aluminum housing with Corro-free™ epoxy powder coat for enhanced durability. It includes shatter-resistant glass lens with silicone gaskets and has stainless steel external hardware. It is ideally designed for delivering full-spectrum, crisp, white light and is suitable for outdoor/indoor flood illumination. Compact modular fixture attaches onto existing SFA6 and SWB6 for easy installation. Light requires an equivalent 400 Watts MH HID lamp and uses energy-efficient technology for up to 62% of energy saving.
Fixture has minimum T4 temperature rating that safely operates in the most hazardous environments and any non-hazardous location. LED Flood light fixture uses high brightness LED arrays in an advanced heat sink design for power source and operates at 5600 K cool color temperature. It has a maximum current rating of 1.608 Amps and the voltage rating of 108 - 250 VDC or 100 - 277 VAC at 50/60 Hz. It has a nominal power rating of 179 Watts and the power factor is greater than 0.85. It operates at a temperature range of -40 to 55 deg C. It is a shock absorbent and vibration resistant solid-state luminaire with up to 60000 hours of rated life.
Fixture offers five lumen output for installation in numerous mounting heights. Flood light includes no mercury or other hazardous substances for more safety. Light uses 3 x 6 terminals for IEC Flood light fixture finds application in locations requiring continuous/consistent light levels, areas requiring frequent ON/OFF of lights and where extremely corrosive, wet, dusty, hot/cold conditions exist. It also finds use in type 4X, marine, wet locations, hose-down environments and indoor/outdoor area lighting in plants, buildings or parking areas. It is also used in locations where flammable vapors, gases, ignitable dusts, fibers or flyings are present. Flood light fixture is also perfect for using in manufacturing plants, heavy industrial, chemical, petrochemical or pharmaceutical facilities, platforms, loading docks, outdoor mounted general area lighting. Flood light fixture is UL listed, CSA certified and meets Type 4X, IP66 standards.
LED FLOOD COOL GLASS LENS 100-277 VAC 108-250 VDC