Fill-Rite - DF120CAN520 - Electric Operated Drum Pump, 120VAC, 8 GPM, 1/4 HP, Stainless steel

  • MFR SKU: DF120CAN520
  • ITEM #: 20465118
    • 0 out of 5 stars
    • 5 Star
      0 %
    • 4 Star
      0 %
    • 3 Star
      0 %
    • 2 Star
      0 %
    • 1 Star
      0 %
  • 0 Reviews / 0 Questions
Currently Not In Stock
This product appears to have been discontinued, however, other similar products may be available. Our product specialists would be happy to research this for you and provide recommendations. Email me suggestions!

ITEM #: 20465118
Electric Operated Drum Pump, Voltage 120VAC, Hz 60, Phase 1, HP 1/4, Motor RPM 3400, Motor Enclosure TEFC, Motor Type Capacitor Start, Housing Material EPDM, Nylon, Santoprene(TM), Stainless Steel, Wetted Materials Nylon, EPDM, Stainless Steel, Santoprene, Hose Material EPDM, For Use With Diesel Exhaust Fluid, GPM 8, Max. Pressure 38 psi, Max. Viscosity 40 cP, Max. GPM for Water 8, Inlet Size 3/4 In., Outlet Size 3/4 In., Discharge Tube Length 20 ft., Hose Length 20 ft.

Fill-Rite - DF120CAN520 - Electric Operated Drum Pump, 120VAC, 8 GPM, 1/4 HP, Stainless steel

  • Item #: 20465118
  • MFR SKU: DF120CAN520
Technical Specs
  • Suction Lift : 6 ft. Discharge Tube Length : 20 ft.
  • Phase : 1 Nozzle Material : Poly, Stainless Steel
  • Amps : 2.4 Max. Pressure : 38 psi
  • Max. Specific Gravity : 1.1 Hose Dia. : 3/4"
  • Overall Width: 7-13/64" Max. Head : 16 ft.
  • Motor Enclosure : TEFC Max. Temp. : 140 Degrees F
  • Features : Integral Pulsation Dampener, Smooth Flow Suction Tube Length : 60"
  • Pump Body Material : Stainless Steel Motor Type : Capacitor Start
  • Includes : Nozzle Boot with Bracket, (2) 1" BSPP x 3/4" Hose Barb 90 Degrees Elbows, (2) 1" BSPP x 3/4" Hose Barb Straight Fittings, (4) Worm Gear Hose Clamps Duty : Intermittent
  • Suction Tube Type : Flexible Hose Housing Material : Stainless steel
  • Wetted Materials : Nylon, EPDM, Stainless Steel, Santoprene Max. GPM for Water : 8
  • GPM : 8 Seal Type : O-ring
  • Hz : 60 Application : Dispensing Diesel Fuel
  • Duty Cycle : Intermittent Inlet Size : 1" BSPP
  • Bypass Valve : Internal For Use With : Diesel Exhaust Fluid
  • Self-Priming : YES
  • Overall Height: 6-45/64"
  • RPM : 3400 Seal Material : EPDM
  • Gasket Material : EPDM Inlet : 3/4" MBSPP
  • Overall Length: 15-1/4" Metered : No
  • Hose Material : EPDM Item : Electric Operated Drum Pump
  • Shaft Material : Stainless Steel Cord Length : 72"
  • Outlet Size : 3/4" Nozzle Type : Automatic
  • Bearing Type : Ball Hose Length : 20 ft.
  • Adapter Type : 3/4" HB Pump Design : Rugged Multi-Diaphragm
  • HP : 1/4 Pressure Range : 38 psi
  • Manufacturers Warranty Length : 2 yr. Max. Liquid Temp. : 140 Degrees F
  • Voltage : 120VAC Adapter Material : Nylon
  • Max. Viscosity : 40 cP Agency Compliance : ETL
  • Includes Suction Tube : Yes Variable Speed : No
  • Hose Outside Dia. : 1" Not Recommended Chemicals : Acetic Acid (Glacial), Acetic Acid 20%, Acetic Acid 80%, Chromic Acid 5%, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 50%, Citric Acid 50%, Formic Acid, Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrochloric/Muriatic Acid (100%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Phosphoric Acid (40% Solution), Sulfuric Acid (to 10%), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Acetone, Methyl Ethyl Ketone (MEK), Ethyl (Ethanol), Isopropyl (Isopropanol), Methyl (Methanol), Antifreeze (Coolant), Ethylene Glycol, Glycerin, Calcium Chloride, Sodium Bicarbonate (10%), Cyclohexane, Gasoline, Heptane, Hexane, Kerosene, Stoddard Solvent (Mineral Spirits), Diesel Fuel, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Ethyl Acetate, Biodiesel, Ammonium Hydroxide, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Sodium Hypochlorite/Bleach (to 20%), Potassium Hydroxide (50%), Lacquer Thinners, Toluene, Xylene, Fresh Water, Salt Water, Deionized Water, Motor Oil, Methyl Chloride, Sodium Bisulfate, Sodium Bisulfite, Trichlorethylene (50%), E85, Anhydrous Ammonia, Ammonia (Liquids), Automatic Transmission Fluid, Brake Fluid, Fertilizers, Fungicides, Herbicides, Lithium Grease, Naphtha, Paint, Paint Thinner, Pesticides, Turpentine, Windshield Washer Fluid
  • Hose Cover Material : EPDM For Media Type : DEF
  • Full Load Amps : 2.4 Includes Spout : Yes
  • Max. Head - Pumps : 30 ft Suction Tube ID : 3/4"
  • Motor HP : 1/4 Spout Connection Type : BSP
  • Nozzle Operation : Automatic Spout Length : 16"
  • Height Above Container : 2-1/2" Housing Material - Pumps : Polypropylene
  • Motor RPM : 3400 Frequency (Hz) : 60
  • Compatible Chemicals : DEF Max. Fluid Temp. : 120 Degrees F
  • For Container Size : 55 gal, 275 gal, 330 gal Power Source : Electric
  • Number of Phases : 1 Plug Type : Type B
  • Discharge Tube Outlet OD : 1" Includes Bung Adapter : No
  • Suction Tube Material : EPDM Noise Level : 80 db
  • Pump Connection ID : 3/4" Max. Head Pressure : 38 psi
  • Diesel Exhaust Fluid Compatible : Yes Pump Connection OD : 1"
  • Min. Fluid Temp. : 15 Degrees F For Container Type : Drum, Tote
  • Includes Discharge Hose : Yes Suction Tube OD : 1"
  • Food Grade : No Runs Dry : Yes
  • Spout Material : Stainless Steel Hose Tube Material : EPDM
  • Max. Flow Rate : 10 gpm Discharge Connection Type : BSP
  • Includes Nozzle : Yes Pump Connection Type : BSP
  • Hose Inside Dia. : 3/4" Discharge Tube Outlet ID : 3/4"
  • Max. Outlet Pressure : 38 psi Gear Lube : NT
  • Grease : NT Spout Discharge Size : 1/2"
  • Rated Voltage : 115VAC Country of Origin (subject to change) : United States
Questions & Answers

There are no questions about this product yet. Be the first to ask a question.

Add Question
0 Customer Ratings & Reviews
0 out of 5 stars
5 Star
0 %
4 Star
0 %
3 Star
0 %
2 Star
0 %
1 Star
0 %

Review this product

Tell us about your personal experience

Write a review

Recently Viewed Items