Fill-Rite - DF120CMN520 - Electric Operated Drum Pump, 120VAC, 8 GPM, 1/4 HP, 3/4" Inlet

  • MFR SKU: DF120CMN520
  • ITEM #: 20465112
    • 0 out of 5 stars
    • 5 Star
      0 %
    • 4 Star
      0 %
    • 3 Star
      0 %
    • 2 Star
      0 %
    • 1 Star
      0 %
  • 0 Reviews / 0 Questions
Currently Not In Stock
This product appears to have been discontinued, however, other similar products may be available. Our product specialists would be happy to research this for you and provide recommendations. Email me suggestions!

ITEM #: 20465112
Electric Operated Drum Pump, Voltage 120VAC, Hz 60, Phase 1, HP 1/4, Motor RPM 3400, Motor Enclosure TEFC, Motor Type Capacitor Start, Housing Material EPDM, Nylon, Santoprene(TM), Stainless Steel, Wetted Materials Nylon, EPDM, Stainless Steel, Santoprene, Hose Material EPDM, For Use With Diesel Exhaust Fluid, GPM 8, Max. Pressure 38 psi, Max. Viscosity 40 cP, Max. GPM for Water 8, Inlet Size 3/4 In., Outlet Size 3/4 In., Discharge Tube Length 20 ft., Hose Length 20 ft.

Fill-Rite - DF120CMN520 - Electric Operated Drum Pump, 120VAC, 8 GPM, 1/4 HP, 3/4" Inlet

  • Item #: 20465112
  • MFR SKU: DF120CMN520
Technical Specs
  • Metered : No Motor Type : Capacitor Start
  • Voltage : 120VAC Hose Dia. : 3/4"
  • HP : 1/4 Pressure Range : 38 psi
  • Duty : Intermittent Hose Length : 20 ft.
  • Outlet Size : 3/4" For Use With : Diesel Exhaust Fluid
  • Max. Liquid Temp. : 140 Degrees F Max. Temp. : 140 Degrees F
  • Discharge Tube Length : 20 ft.
  • Overall Height: 6-45/64"
  • Cord Length : 72" GPM : 8
  • Motor Enclosure : TEFC Phase : 1
  • Pump Design : Rugged Multi-Diaphragm Adapter Material : Nylon
  • Suction Lift : 6 ft.
  • Overall Length: 15-1/4"
  • Bearing Type : Ball Amps : 2.4
  • Max. Viscosity : 40 cP Suction Tube Type : Flexible Hose
  • Max. GPM for Water : 8 Hose Material : EPDM
  • Manufacturers Warranty Length : 2 yr. RPM : 3400
  • Adapter Type : 3/4" HB Includes : Nozzle Boot with Bracket, (2) 1" BSPP x 3/4" Hose Barb 90 Degrees Elbows, (2) 1" BSPP x 3/4" Hose Barb Straight Fittings, (4) Worm Gear Hose Clamps
  • Duty Cycle : Intermittent Nozzle Type : Manual
  • Housing Material : EPDM, Nylon, Santoprene(TM), Stainless Steel Nozzle Material : Poly
  • Max. Head : 16 ft. Seal Material : EPDM
  • Max. Specific Gravity : 1.1 Pump Body Material : Stainless Steel
  • Seal Type : O-ring Item : Electric Operated Drum Pump
  • Shaft Material : Stainless Steel Inlet : 3/4" MBSPP
  • Hz : 60 Application : Dispensing Diesel Fuel
  • Gasket Material : EPDM Features : Integral Pulsation Dampener, Smooth Flow
  • Max. Pressure : 38 psi Wetted Materials : Nylon, EPDM, Stainless Steel, Santoprene
  • Self-Priming : YES Suction Tube Length : 60"
  • Bypass Valve : Internal Inlet Size : 3/4"
  • Overall Width: 7-13/64" Type : Electric
  • Agency Compliance : ETL Pump Connection ID : 3/4"
  • Pump Connection OD : 1" Runs Dry : Yes
  • Suction Tube Material : EPDM Max. Head Pressure : 38 psi
  • Discharge Connection Type : BSP For Container Size : 55 gal, 275 gal, 330 gal
  • Not Recommended Chemicals : Acetic Acid (Glacial), Acetic Acid 20%, Acetic Acid 80%, Chromic Acid 5%, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 50%, Citric Acid 50%, Formic Acid, Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrochloric/Muriatic Acid (100%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Phosphoric Acid (40% Solution), Sulfuric Acid (to 10%), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Acetone, Methyl Ethyl Ketone (MEK), Ethyl (Ethanol), Isopropyl (Isopropanol), Methyl (Methanol), Antifreeze (Coolant), Ethylene Glycol, Glycerin, Calcium Chloride, Sodium Bicarbonate (10%), Cyclohexane, Gasoline, Heptane, Hexane, Kerosene, Stoddard Solvent (Mineral Spirits), Diesel Fuel, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Ethyl Acetate, Biodiesel, Ammonium Hydroxide, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Sodium Hypochlorite/Bleach (to 20%), Potassium Hydroxide (50%), Lacquer Thinners, Toluene, Xylene, Fresh Water, Salt Water, Deionized Water, Motor Oil, Methyl Chloride, Sodium Bisulfate, Sodium Bisulfite, Trichlorethylene (50%), E85, Anhydrous Ammonia, Ammonia (Liquids), Automatic Transmission Fluid, Brake Fluid, Fertilizers, Fungicides, Herbicides, Lithium Grease, Naphtha, Paint, Paint Thinner, Pesticides, Turpentine, Windshield Washer Fluid Variable Speed : No
  • For Container Type : Drum, Tote Spout Material : Poly
  • Spout Length : 16" Max. Flow Rate : 10 gpm
  • Plug Type : Type B Includes Nozzle : Yes
  • Hose Tube Material : EPDM Hose Inside Dia. : 3/4"
  • Compatible Chemicals : DEF Hose Outside Dia. : 1"
  • Motor HP : 1/4 Discharge Tube Outlet ID : 3/4"
  • Suction Tube OD : 1" Food Grade : No
  • Pump Connection Type : BSP Housing Material - Pumps : Polypropylene
  • Nozzle Operation : Manual Max. Fluid Temp. : 120 Degrees F
  • Diesel Exhaust Fluid Compatible : Yes Spout Connection Type : BSP
  • Hose Cover Material : EPDM Power Source : Electric
  • Includes Discharge Hose : Yes Motor RPM : 3400
  • Suction Tube ID : 3/4" Includes Suction Tube : Yes
  • Number of Phases : 1 Noise Level : 80 db
  • Frequency (Hz) : 60 Full Load Amps : 2.4
  • Min. Fluid Temp. : 15 Degrees F Discharge Tube Outlet OD : 1"
  • Max. Head - Pumps : 30 ft Includes Spout : Yes
  • For Media Type : DEF Includes Bung Adapter : No
  • Height Above Container : 2-1/2" Max. Outlet Pressure : 38 psi
  • Gear Lube : NT Rated Voltage : 115VAC
  • Spout Discharge Size : 1/2" Grease : NT
  • Country of Origin (subject to change) : United States
Questions & Answers

There are no questions about this product yet. Be the first to ask a question.

Add Question
0 Customer Ratings & Reviews
0 out of 5 stars
5 Star
0 %
4 Star
0 %
3 Star
0 %
2 Star
0 %
1 Star
0 %

Review this product

Tell us about your personal experience

Write a review

Recently Viewed Items