Fill-Rite - DF120N - Electric Operated Drum Pump, 120VAC, 8 GPM, 1/4 HP, Stainless steel

  • MFR SKU: DF120N
  • ITEM #: 20465130
    • 0 out of 5 stars
    • 5 Star
      0 %
    • 4 Star
      0 %
    • 3 Star
      0 %
    • 2 Star
      0 %
    • 1 Star
      0 %
  • 0 Reviews / 0 Questions
Currently Not In Stock
This product appears to have been discontinued, however, other similar products may be available. Our product specialists would be happy to research this for you and provide recommendations. Email me suggestions!

ITEM #: 20465130
Electric Operated Drum Pump, Voltage 120VAC, Hz 60, Phase 1, HP 1/4, Motor RPM 3400, Motor Enclosure TEFC, Motor Type Capacitor Start, Housing Material EPDM, Nylon, Santoprene(TM), Stainless Steel, Wetted Materials Nylon, EPDM, Stainless Steel, Santoprene, For Use With Diesel Exhaust Fluid, GPM 8, Max. Pressure 38 psi, Max. Viscosity 40 cP, Max. GPM for Water 8, Inlet Size 3/4 In., Outlet Size 3/4 In., Metered No, Adapter Type 3/4 In. HB, Adapter Material Nylon, Agency Compliance ETL

Fill-Rite - DF120N - Electric Operated Drum Pump, 120VAC, 8 GPM, 1/4 HP, Stainless steel

  • Item #: 20465130
  • MFR SKU: DF120N
Technical Specs
  • Features : Integral Pulsation Dampener, Smooth Flow Duty Cycle : Intermittent
  • Application : Dispensing Diesel Fuel Shaft Material : Stainless Steel
  • Motor Type : Capacitor Start Max. Liquid Temp. : 140 Degrees F
  • Phase : 1 Adapter Material : Nylon
  • Max. Viscosity : 40 cP Wetted Materials : Nylon, EPDM, Stainless Steel, Santoprene
  • Max. Specific Gravity : 1.1 Max. Head : 16 ft.
  • Inlet Size : 1" BSPP Max. GPM for Water : 8
  • GPM : 8 Outlet Size : 3/4"
  • Manufacturers Warranty Length : 2 yr. Pump Body Material : Stainless Steel
  • Suction Lift : 6 ft. Max. Pressure : 38 psi
  • Metered : No
  • Overall Height: 6-45/64"
  • Self-Priming : YES HP : 1/4
  • Housing Material : Stainless steel RPM : 3400
  • Hz : 60 Pressure Range : 38 psi
  • Seal Type : O-ring
  • Overall Length: 15-1/4"
  • Motor Enclosure : TEFC Voltage : 120VAC
  • Adapter Type : 3/4" HB Seal Material : EPDM
  • Bearing Type : Ball For Use With : Diesel Exhaust Fluid
  • Cord Length : 72" Duty : Intermittent
  • Gasket Material : EPDM Amps : 2.4
  • Max. Temp. : 140 Degrees F Bypass Valve : Internal
  • Item : Electric Operated Drum Pump Type : Electric
  • Includes : (2) 1" BSPP x 3/4" Hose Barb 90 Degrees Elbows, (2) 1" BSPP x 3/4" Hose Barb Straight Fittings, (4) Worm Gear Hose Clamps Pump Design : Rugged Multi-Diaphragm
  • Agency Compliance : ETL Not Recommended Chemicals : Acetic Acid (Glacial), Acetic Acid 20%, Acetic Acid 80%, Chromic Acid 5%, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 50%, Citric Acid 50%, Formic Acid, Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrochloric/Muriatic Acid (100%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Phosphoric Acid (40% Solution), Sulfuric Acid (to 10%), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Acetone, Methyl Ethyl Ketone (MEK), Ethyl (Ethanol), Isopropyl (Isopropanol), Methyl (Methanol), Antifreeze (Coolant), Ethylene Glycol, Glycerin, Calcium Chloride, Sodium Bicarbonate (10%), Cyclohexane, Gasoline, Heptane, Hexane, Kerosene, Stoddard Solvent (Mineral Spirits), Diesel Fuel, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Ethyl Acetate, Biodiesel, Ammonium Hydroxide, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Sodium Hypochlorite/Bleach (to 20%), Potassium Hydroxide (50%), Lacquer Thinners, Toluene, Xylene, Fresh Water, Salt Water, Deionized Water, Motor Oil, Methyl Chloride, Sodium Bisulfate, Sodium Bisulfite, Trichlorethylene (50%), E85, Anhydrous Ammonia, Ammonia (Liquids), Automatic Transmission Fluid, Brake Fluid, Fertilizers, Fungicides, Herbicides, Lithium Grease, Naphtha, Paint, Paint Thinner, Pesticides, Turpentine, Windshield Washer Fluid
  • Motor RPM : 3400 Diesel Exhaust Fluid Compatible : Yes
  • Includes Bung Adapter : No Includes Nozzle : No
  • Pump Connection OD : 1" Number of Phases : 1
  • Variable Speed : No Suction Tube Material : EPDM
  • Runs Dry : Yes Noise Level : 80 db
  • Housing Material - Pumps : Polypropylene Max. Flow Rate : 10 gpm
  • Discharge Tube Outlet ID : 3/4" Pump Connection Type : BSP
  • Min. Fluid Temp. : 15 Degrees F Frequency (Hz) : 60
  • Full Load Amps : 2.4 For Container Type : Drum, Tote
  • Food Grade : No Max. Head Pressure : 38 psi
  • Max. Head - Pumps : 30 ft Compatible Chemicals : DEF
  • For Container Size : 55 gal, 275 gal, 330 gal Discharge Connection Type : BSP
  • Pump Connection ID : 3/4" Suction Tube OD : 1"
  • Power Source : Electric For Media Type : DEF
  • Includes Discharge Hose : No Motor HP : 1/4
  • Includes Suction Tube : Yes Discharge Tube Outlet OD : 1"
  • Plug Type : Type B Height Above Container : 2-1/2"
  • Max. Fluid Temp. : 120 Degrees F Max. Outlet Pressure : 38 psi
  • Grease : NT Rated Voltage : 115VAC
  • Gear Lube : NT Country of Origin (subject to change) : United States
Questions & Answers

There are no questions about this product yet. Be the first to ask a question.

Add Question
0 Customer Ratings & Reviews
0 out of 5 stars
5 Star
0 %
4 Star
0 %
3 Star
0 %
2 Star
0 %
1 Star
0 %

Review this product

Tell us about your personal experience

Write a review

Recently Viewed Items