Image is an illustration, may not reflect the exact product sold.


Other products by Fluke

Fluke - P3214-PSI - - Fluke Water Deadweight Tester 10K Psi (4185461)

  • MFR SKU: P3214-PSI
  • ITEM #: 11957400
    • 0 out of 5 stars
    • 5 Star
      0 %
    • 4 Star
      0 %
    • 3 Star
      0 %
    • 2 Star
      0 %
    • 1 Star
      0 %
  • 0 Reviews / 0 Questions
Currently Not In Stock
This product appears to have been discontinued, however, other similar products may be available. Our product specialists would be happy to research this for you and provide recommendations. Email me suggestions!

ITEM #: 11957400
P3214-PSI - Fluke Water Deadweight Tester 10K Psi (4185461)
The combined pressure and vacuum deadweight tester provide calibrations from 1-30 inHg vacuum (0.03-1 bar) and 3-500 psi (0.2-35 bar) in one primary standard.
This versatile instrument provides calibrations from 1-30 inHg vacuum (0.03-1 bar) and 3-500 psi (0.2-35 bar) in one extremely accurate yet easy to use primary standard. A selector valve converts the unit from pressure to vacuum mode without the need to exchange pistons....
ITEM #: 11957400
P3214-PSI - Fluke Water Deadweight Tester 10K Psi (4185461)
The combined pressure and vacuum deadweight tester provide calibrations from 1-30 inHg vacuum (0.03-1 bar) and 3-500 psi (0.2-35 bar) in one primary standard.
This versatile instrument provides calibrations from 1-30 inHg vacuum (0.03-1 bar) and 3-500 psi (0.2-35 bar) in one extremely accurate yet easy to use primary standard. A selector valve converts the unit from pressure to vacuum mode without the need to exchange pistons. Units are manufactured to the highest standards with certified accuracies traceable to International Standards Laboratories such as the National Institute of Standards and Technology (NIST). These piston/cylinder type pneumatic standards provide excellent stability, repeatability and accuracy. An optional built-in hand pump can be added for both pressure and vacuum generation.
  • 0.015% of reading accuracy standard (0.008% optional)
  • 1-30 inHg vacuum (0.03-1 bar vacuum)
  • 3-500 psi (0.2-35 bar) pressure
  • inH 2 O and mbar ranges available
  • Series 3 non-magnetic stainless steel weights
  • Units can be trimmed to local gravity FOC
Read More >>

Fluke - P3214-PSI - - Fluke Water Deadweight Tester 10K Psi (4185461)

  • Item #: 11957400
  • MFR SKU: P3214-PSI
Technical Specs
  • Accuracy
  • Accuracy 1 ± 0.015% of reading (± 0.008% optional)
  • 1. Accuracy based on % of reading from 10% to 100% of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10% ± (accuracy class) x 10% of the piston range.
  • Mass and PCU Materials of Construction
  • Standard weight material Series 3 non-magnetic austenitic stainless steel
  • Weight density 7.8 g/cm?
  • Optional fractional weights Solution heat treated aluminum
  • Weight density 2.7 g/cm?
  • Models P3011, P3012, P3013, P3022, P3023, P3025 (V) Piston material Ceramic
  • Cylinder material Martensitic steel
  • Coefficient of expansion 11 ppm/?C
  • Models P3014, P3015, P3025 (P) P3031, P3032 (P & V) Piston material Tungsten carbide
  • Cylinder material Martensitic steel
  • Coefficient of expansion 16.5 ppm/?C
  • Model P3016 Piston material Tungsten carbide
  • Cylinder Material Tungsten carbide
  • Coefficient of Expansion 11 ppm/?C
  • General
  • Test port adaptors 1/8, 1/4, 3/8 and ? NPT or BSP
  • Instrument weight 24 lbs
  • Instrument size (W x D x H) 17.5 x 12 x 8.5
  • Mass set weight (typical) 65 lbs
  • Minimum Standard Weight Increments
  • P3012, P3022 Pressure 1 inH 2 O, (5 mbar)
  • P3013, P3023 Pressure 2 inH 2 O, (10 mbar)
  • P3014, P3015, P3025 Pressure 1 psi, (0.1 bar)
  • P3016, P3031, P3032 1 psi, (0.1 bar)
  • P3011, P3022, P3023, P3025 Vacuum 0.2 inHg (10 mbar)
  • Optional Fractional Weights
  • P3014, P3015, P3025 Pressure 0.1 psi (0.01 bar)
  • Built-in Hand Pumps
  • Pressure mode Max pressure 300 psi (20 bar)
  • Vacuum mode To 90% vacuum
  • Operating Fluid for Liquid Lubricated Models
  • 55-655 Mineral oil (standard)
  • Krytox For oxygen-safe applications (optional)
  • Options
  • PressCal Software Windows-based software program that allows users to easily apply all necessary corrections to enhance the deadweight tester performance. Calibration details are then stored and/or used to automatically create a calibration certificate. PressCal is provided as standard with all 0.008% instruments.
  • Krytox As operating fluid for liquid lubricated gas operated models.
Questions & Answers

There are no questions about this product yet. Be the first to ask a question.

Add Question
0 Customer Ratings & Reviews
0 out of 5 stars
5 Star
0 %
4 Star
0 %
3 Star
0 %
2 Star
0 %
1 Star
0 %

Review this product

Tell us about your personal experience

Write a review

Recently Viewed Items