Image is an illustration, may not reflect the exact product sold.


Other products by Fluke

Fluke - P3224-KGCM2 - - Fluke Water Deadweight Tester Dual Range 700 Kgf/Cm2 (4185530)

  • MFR SKU: P3224-KGCM2
  • ITEM #: 11957408
    • 0 out of 5 stars
    • 5 Star
      0 %
    • 4 Star
      0 %
    • 3 Star
      0 %
    • 2 Star
      0 %
    • 1 Star
      0 %
  • 0 Reviews / 0 Questions
Currently Not In Stock
This product appears to have been discontinued, however, other similar products may be available. Our product specialists would be happy to research this for you and provide recommendations. Email me suggestions!

ITEM #: 11957408
P3224-KGCM2 - Fluke Water Deadweight Tester Dual Range 700 Kgf/Cm2 (4185530)
The P3200 Distilled Water Operated Hydraulic Deadweight Testers are available in single or dual piston formats for increased operating ranges.
The P3200 models are available in single or dual piston formats for increased operating ranges. Units can be supplied in psi, bar, kgf/cm², and MPa. This robust instrument is highly accurate, quick and easy to use. Units feature a built-in priming pump for large...
ITEM #: 11957408
P3224-KGCM2 - Fluke Water Deadweight Tester Dual Range 700 Kgf/Cm2 (4185530)
The P3200 Distilled Water Operated Hydraulic Deadweight Testers are available in single or dual piston formats for increased operating ranges.
The P3200 models are available in single or dual piston formats for increased operating ranges. Units can be supplied in psi, bar, kgf/cm², and MPa. This robust instrument is highly accurate, quick and easy to use. Units feature a built-in priming pump for large volume applications, piston flotation indicators and a high quality screw press for fine pressure control.
Options
PressCal software for pressure calculations and certificate generation
  • Pressure ranges to 10, 000 psi (700 bar)
  • 0.015% of reading accuracy standard (0.008% optional)
  • Single or dual piston formats
  • Built-in hand pumps standard
  • Mounted spirit level with adjustable feet
  • Units can be trimmed to local gravity FOC
Read More >>

Fluke - P3224-KGCM2 - - Fluke Water Deadweight Tester Dual Range 700 Kgf/Cm2 (4185530)

  • Item #: 11957408
  • MFR SKU: P3224-KGCM2
Technical Specs
  • Pressure Ranges
  • Distilled water operated Ranges to 10, 000 psi (700 bar)
  • Accuracy
  • Accuracy 1 ± 0.015% of reading (± 0.008% optional)
  • 1. Accuracy based on % of reading from 10% to 100% of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10% ± (accuracy class) x 10% of the piston range.
  • Materials of Construction
  • Standard weight material Series 3 non-magnetic austenitic stainless steel
  • Weight density 7.8 g/cm³
  • Optional fractional weights Solution heat treated aluminum
  • Weight density 2.7 g/cm³
  • Piston material Tungsten carbide with nickel binder
  • Density- 15.0 g/cm³
  • Cylinder material Hardened martensitic steel
  • Tungsten carbide (water above 500 psi, 35 bar)
  • Thermal coefficients of expansion Oil piston/cylinder 16.5 ppm/° C
  • Water (above 500 psi, 35 bar) 11 ppm/° C
  • General
  • Test port adaptors 1/8, 1/4, 3/8 and 1/2
  • NPT or BSP
  • Instrument weight 36 lbs (16 kg)
  • Instrument size (W x D x H) 17.5 x 12 x 8.5 in (440 x 300 x 215 mm)
  • Mass set weight (typical) 80 lbs (36 kg)
  • Reservoir volume 150 cc
  • Screw press displacement 5.5 cc
  • Pump displacement 4.7 cc per stroke
  • O-ring seal materials Buna N as standard, Viton and EPDM available
  • Weight Increments
  • Minimum standard weight increments Up to 500 psi (35 bar): 1 psi (0.1 bar)
  • 500 to 5000 psi (35 to 350 bar): 10 psi (1 bar)
  • 5000 to 20, 000 psi (350 to 1400 bar): 20 psi (2 bar)
  • Model P3112: 1 psi (0.1 bar)
  • Optional fractional weights Up to 500 psi (35 bar): 0.1 psi (0.01 bar)
  • 500 to 5000 psi (35 to 350 bar): 1 psi (0.1 bar)
  • 5000 to 20, 000 psi (350 to 1400 bar): 2 psi (0.2 bar)
  • Operating Fluids
  • Operating fluids Distilled or deionized water
  • Options
  • PressCal software Windows-based software program that allows users to easily apply all necessary corrections to enhance the deadweight tester performance. Calibration details are then stored and/or used to automatically create a calibration certificate. PressCal is provided as standard with all 0.008% instruments
  • Fluids Instruments can be supplied for use with Skydrol or brake fluids. Due to the aggressive nature of these fluids the standard nitrile seals and the acrylic reservoir tube will be replaced by either Viton or EPDM seals (as applicable) and an aluminum reservoir tube. For these or any other specialty fluid applications, please consult the factory.
Questions & Answers

There are no questions about this product yet. Be the first to ask a question.

Add Question
0 Customer Ratings & Reviews
0 out of 5 stars
5 Star
0 %
4 Star
0 %
3 Star
0 %
2 Star
0 %
1 Star
0 %

Review this product

Tell us about your personal experience

Write a review

Recently Viewed Items