Image is an illustration, may not reflect the exact product sold.


Other products by General Machine Products

General Machine Products - J2 - GMP J2 Cable Lasher w/ Hard Carrying Case

  • MFR SKU: J2
  • ITEM #: 11397033
  • 0 Reviews / 0 Questions
$9,133.10
  • Saw It For Less?
Stock Status: SHIPS SOON (reserve your unit today)

ITEM #: 11397033
The J2 Lasher from GMP can lash single or multiple aerial cable bundles up to 3 inches in diameter on a suspension strand of 1/4 inch to 7/16 inches. The J2 has an all-range tensioning device to optimize strand traction and high strength front and rear gates for tighter cable lashing. The J2 features a built-in mechanical brake to prevent unintended reversal and an automatic drum lock for easy span transfer.
Features:
  • Consists of a rotating drum supported on a carriage that...
ITEM #: 11397033
The J2 Lasher from GMP can lash single or multiple aerial cable bundles up to 3 inches in diameter on a suspension strand of 1/4 inch to 7/16 inches. The J2 has an all-range tensioning device to optimize strand traction and high strength front and rear gates for tighter cable lashing. The J2 features a built-in mechanical brake to prevent unintended reversal and an automatic drum lock for easy span transfer.
Features:
  • Consists of a rotating drum supported on a carriage that provides the mounting for a driving mechanism, cable lifters, cable and strand rollers
  • Fast setup procedure, quick coil loading, and automatic drum lock for easy span transfers and smooth forward travel
  • J2 Lashers make overlashing easy. Just push down on the strand roller knob, rotate it a quarter turn and you can lash additional cables together on previously lashed cable
  • Positive internal gear to gear mechanism has no chains or belts to stretch, slip or break
  • Constructed with heat-treated, plated steel, stainless steel, brass and aluminum components. Contains sealed and oiless bearings to minimize maintenance and assure durability
  • Pre-drilled and tapped at the factory for mounting of the lasher guard or "halo". For use when lashing in overgrown areas.
  • The J2 and every GMP lasher is fully serviceable to "good-as-new" specifications at our factory and at factory-trained service locations around the globe
  • The lasher is furnished with a rugged lightweight storage chest with corrosion resistant hardware, recessed latches and a moisture-proof, tongue-in-groove design for maximum protection when not in use
  • Supplied with a 6 ft. bridle rope assembly and snap hooks, and an information and operation manual

  • Specifications:
  • Will lash any single or multiple aerial cables up to 3 in. (76 mm) diameter across on any suspension strand from 1/4 in. (6 mm) to 7/16 in. (11 mm). A factory modification will allow the lasher to accommodate 1/2 in. (12.7 mm) strand if necessary
  • Each of two recessed magazines will hold a 1200 ft. coil of .045 in. (365 m of 1.1 mm wire) lashing wire (or 450 ft. of .065 in.). The Lashing Wire is fully recessed and covered by a gate

  • Kit Includes:
  • 1x J2 Lasher
  • 1x Rope with Hooks
  • 1x Hard Carrying Case
  • 1x Operation Manual

  • GMP J2 Cable Lasher Operation Manual
Read More >>

General Machine Products - J2 - GMP J2 Cable Lasher w/ Hard Carrying Case

  • Item #: 11397033
  • MFR SKU: J2

There are no questions about this product yet. Be the first to ask a question.

0 out of 5 stars
5 Star
0 %
4 Star
0 %
3 Star
0 %
2 Star
0 %
1 Star
0 %

Review this product

Tell us about your personal experience

Recently Viewed Items