INSTOCK Labs - TSEISV-V-R - Envision Complete Plumbing Assemblies, Right Side, Vacuum, Yellow

ITEM #: 15246212
Envision plumbing assemblies are furnished complete and include a fine control needle valve service turret with shank, a service hose as well as a male quick disconnect fitting. These complete assemblies are designed specifically for use in a laboratory environment. All quick connects have 316 stainless steel internal components. Keyed quick connects will only couple with components of the same key with are identified by a color code. Assemblies consist of 2 major components and are shipped loose to be installed at the job site. These hoses carry services from the overhead service panel, through the upright of the table and to the shank of the fi x ture. They consist of either a color coded reinforced PVC. They include two male 3/8" IPS outlet nipples and adapters to attach to the male quick disconnect as well as the shank of the service valve. Each hose e x tends 48" above the table frame. single end shut off plugs do not have an internal valve. Each unit consists of a 135° turret with one polished chrome valve with a brass floating cone and integral brass seat. They provide metering control of laboratory gases at pressures up to 60 PSI. The shank is bored for the connection of the service hose.
These female quick disconnect fittings mount within the overhead service panel and connect the quick disconnect fittings from the table system to the building services. All fittings include 3/8" stems and hardware to attach to the overhead service panel. All fitting types are keyed to ensure that they couple only with one of the same service.
Envision Complete Plumbing Assemblies, Right Side, Vacuum, Yellow
This listing is for Each