KeyScan / dormakaba - NETCOM6P - Keyscan NETCOM6P Communication Module - For Control Panel

ITEM #: 3057974
NETCOM2P and NETCOM6P (Encrypted) Plug on TCP/IP Communication Modules

Keyscan's NETCOM2P and NETCOM6P (encrypted) TCP/IP communication modules are the fastest and easiest way to enable Keyscan Access Control Units (ACUs) to be connected and communicate over a network.

Both NETCOM2P and NETCOM6P (encrypted) communication modules connect directly to the ACU or, for legacy systems, the CB-485 communication module allowing you to establish communication along an existing LAN/WAN network.

Using NETCOM2P and NETCOM6P (Encrypted) on CIM based installations:

Keyscan's NETCOM2P or NETCOM6P TCP/IP Communication modules are designed to work seamlessly with Keyscan's CIM (Communication Interlink Module). They are both modular TCP/IP converters that plug directly into the Keyscan's CIM communication module to establish network communication to the server or among multiple ACUs along a CAN Bus Network.

The CIM module with the network connection is referred to as CIM 0 and must have a jumper on J4. Keyscan recommends that you limit your communication loop and communication software not to exceed 100 readers or 12 panels.

The NETCOM2P and NETCOM6P must be programmed with the Keyscan NETCOM Program Tool Utility in order to function. Refer to the NETCOM2P/CIM or NETCOM6P/CIM programming guides for full instructions

NET6P-KHS (Encrypted) for Keyscan Hosted Services:

Keyscan's NET6P-KHS (encrypted) TCP/IP communication modules are the fastest and easiest way to enable Keyscan Access Control Units (ACUs) to be connected and communicate via Keyscan Hosted Services.

The NET6P-KHS (encrypted) communication module is DHCP set up and pre-configured to automatically connect to Keyscan servers allowing you to establish communication along an existing LAN/WAN network.