Toll Free
1.866.636.2487
These clarified polypropylene jars will do the job of storing evidence that may need to be e x amined within the container, or may need a little e x tra protection. Available with screw top lid. Polypropylene Evidence Jar, 16 oz. This listing is for Pack of 12
Transparent Straight-Side Containers of PETE (Polyethylene Terephthalate) with white polypropylene liner less screw closures. Store pastes, samples, powders, specimens etc. in industrial and lab applications. PETE is durable, shatterproof and has e x cellent gas barrier properties with H20, O2 and CO2. These jars may be used below freezing to a ma x imum of 70°C. Straight-Side Container, PETE, PP White Closure, 4oz / 125mL This listing is for Pack of 12
NALGENE* Polypropylene Straight-Sided Jars^ 15mL translucent jar. Chemical resistant. Autoclavable. Supplied with 38mm polypropylene screw closures. Caps are unlined, non-contaminating, and autoclavable. Suitable for food and beverage use. Meets requirements of CFR21, Part 177.1520. This listing is for Pack of 12
NALGENE* Polypropylene Straight-Sided Jars^ 60mL translucent jar. Chemical resistant. Autoclavable. Supplied with 53mm polypropylene screw closures. Caps are unlined, non-contaminating, and autoclavable. Suitable for food and beverage use. Meets requirements of CFR21, Part 177.1520. This listing is for Pack of 12
NALGENE* Polypropylene Straight-Sided Jars^ 30mL translucent jar. Chemical resistant. Autoclavable. Supplied with 43mm polypropylene screw closures. Caps are unlined, non-contaminating, and autoclavable. Suitable for food and beverage use. Meets requirements of CFR21, Part 177.1520. This listing is for Pack of 12
NALGENE* Polypropylene Straight-Sided Jars^ 250mL translucent jar. Chemical resistant. Autoclavable. Supplied with 70mm polypropylene screw closures. Caps are unlined, non-contaminating, and autoclavable. Suitable for food and beverage use. Meets requirements of CFR21, Part 177.1520. This listing is for Pack of 6
These wide-mouth flint glass jars come with phenolic lids. They are available in multiple capacities. PRODUCT WARNINGS WARNING: This product can e x pose you to chemicals including arsenic, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to . Our products are not toys . Use in a laboratory or educational setting only. Not for children 13 and under. Jar Specimen with Lid, 8oz, Pack of 24 This listing is for Pack of 12
Transparent Straight-Side Containers of PETE (Polyethylene Terephthalate) with white polypropylene liner less screw closures. Store pastes, samples, powders, specimens etc. in industrial and lab applications. PETE is durable, shatterproof and has e x cellent gas barrier properties with H20, O2 and CO2. These jars may be used below freezing to a ma x imum of 70°C. Straight-Side Container, PETE, PP White Closure, 32oz / 1000mL This listing is for Pack of 6
QEC’s wide mouth straight-sided jars are e x cellent for sampling of soil, sediment and sludge. Level Three 4 oz. and 2 oz. jars are also tested and certified for volatiles. All are shipped assembled with PTFE-lined polypropylene caps. Preparation Levels for products on this page:LEVEL 1: Assembled & QA checkedLEVEL 2: Pre-cleaned to EPA standardsLEVEL 3: Pre-cleaned to EPA standards, w/ Certificate of AnalysisLEVEL 5: Bulk-packaged, assembled & QA checkedLEVEL 6: Bulk-packaged, pre-cleaned...
QEC’s wide mouth straight-sided jars are e x cellent for sampling of soil, sediment and sludge. Level Three 4 oz. and 2 oz. jars are also tested and certified for volatiles. All are shipped assembled with PTFE-lined polypropylene caps. Preparation Levels for products on this page:LEVEL 1: Assembled & QA checkedLEVEL 2: Pre-cleaned to EPA standardsLEVEL 3: Pre-cleaned to EPA standards, w/ Certificate of AnalysisLEVEL 5: Bulk-packaged, assembled & QA checkedLEVEL 6: Bulk-packaged, pre-cleaned...
QEC’s wide mouth straight-sided jars are e x cellent for sampling of soil, sediment and sludge. Level Three 4 oz. and 2 oz. jars are also tested and certified for volatiles. All are shipped assembled with PTFE-lined polypropylene caps. Preparation Levels for products on this page:LEVEL 1: Assembled & QA checkedLEVEL 2: Pre-cleaned to EPA standardsLEVEL 3: Pre-cleaned to EPA standards, w/ Certificate of AnalysisLEVEL 5: Bulk-packaged, assembled & QA checkedLEVEL 6: Bulk-packaged, pre-cleaned...
NALGENE* Polypropylene Straight-Sided Jars^ 500mL translucent jar. Chemical resistant. Autoclavable. Supplied with 120mm polypropylene screw closures. Caps are unlined, non-contaminating, and autoclavable. Suitable for food and beverage use. Meets requirements of CFR21, Part 177.1520. This listing is for Pack of 6
QEC’s wide mouth straight-sided jars are e x cellent for sampling of soil, sediment and sludge. Level Three 4 oz. and 2 oz. jars are also tested and certified for volatiles. All are shipped assembled with PTFE-lined polypropylene caps. Preparation Levels for products on this page:LEVEL 1: Assembled & QA checkedLEVEL 2: Pre-cleaned to EPA standardsLEVEL 3: Pre-cleaned to EPA standards, w/ Certificate of AnalysisLEVEL 5: Bulk-packaged, assembled & QA checkedLEVEL 6: Bulk-packaged, pre-cleaned...
Constructed of glass-clear styrene for complete visibility, these vials are excellent for storing dry materials, powders, tablets, and other samples. Heavy, rigid-wall construction ensures long service Can be used at temperatures from -20 to 70°C (-4 to 158°F) Supplied with tight-fitting, polyethylene snap-on caps Available in nine (9) sizes from 3 dram (11ml) through 40 dram (148ml) Catalog No.:: F175750010,Size: 10 dram (37ml),Dimensions (O.d. X H): 29 x 82mm (1? x 3¼"),Pack: 144,Quantity / Pack:...
NALGENE* Polypropylene Straight-Sided Jars^ 125mL translucent jar. Chemical resistant. Autoclavable. Supplied with 70mm polypropylene screw closures. Caps are unlined, non-contaminating, and autoclavable. Suitable for food and beverage use. Meets requirements of CFR21, Part 177.1520. This listing is for Pack of 12
QEC’s wide mouth straight-sided jars are e x cellent for sampling of soil, sediment and sludge. Level Three 4 oz. and 2 oz. jars are also tested and certified for volatiles. All are shipped assembled with PTFE-lined polypropylene caps. Preparation Levels for products on this page:LEVEL 1: Assembled & QA checkedLEVEL 2: Pre-cleaned to EPA standardsLEVEL 3: Pre-cleaned to EPA standards, w/ Certificate of AnalysisLEVEL 5: Bulk-packaged, assembled & QA checkedLEVEL 6: Bulk-packaged, pre-cleaned...
This listing is for EA of 1.
Containers molded of white opaque polypropylene. Lightweight containers are not considered leak-proof. Many laboratory and industrial uses. Supplied with polypropylene screw closures. Ma x imum temperature polypropylene is 121ºC. Jars PP White 2 Oz This listing is for Case of 72
With Caps with PTFE-Faced LDPE Foam Liners Wide-mouth design for efficient addition and removal of contentsClear glass allows for easy viewing of contentsType-III Soda Lime Glass Jar, SS, Clear, 16Oz, Phen, PTFE This listing is for Case of 12
Containers molded of white opaque polypropylene. Lightweight containers are not considered leak-proof. Many laboratory and industrial uses. Supplied with polypropylene screw closures. Ma x imum temperature polypropylene is 121ºC. Jars PP White 4 Oz This listing is for Case of 72
NALGENE* Polypropylene Straight-Sided Jars^ 1000mL translucent jar. Chemical resistant. Autoclavable. Supplied with 120mm polypropylene screw closures. Caps are unlined, non-contaminating, and autoclavable. Suitable for food and beverage use. Meets requirements of CFR21, Part 177.1520. This listing is for Pack of 6
Containers molded of white opaque polypropylene. Lightweight containers are not considered leak-proof. Many laboratory and industrial uses. Supplied with polypropylene screw closures. Ma x imum temperature polypropylene is 121ºC. Jars PP White 1/4 Oz This listing is for Case of 144
With Caps with PTFE-Faced LDPE Foam Liners Wide-mouth design for efficient addition and removal of contentsClear glass allows for easy viewing of contentsType-III Soda Lime Glass Jar, SS, Clear, 6Oz, Phen, PTFE This listing is for Case of 24
With Caps with Tinfoil Liners Wide-mouth design for efficient addition and removal of contentsClear glass allows for easy viewing of contentsType-III Soda Lime Glass Jar, SS, Clear, 8Oz, Phen, Foil This listing is for Case of 24
Containers molded of white opaque polypropylene. Lightweight containers are not considered leak-proof. Many laboratory and industrial uses. Supplied with polypropylene screw closures. Ma x imum temperature polypropylene is 121ºC. Jars PP White 8 Oz This listing is for Case of 48
With Caps with Pulp/Vinyl Liners Wide-mouth design for efficient addition and removal of contentsClear glass allows for easy viewing of contentsType-III Soda Lime Glass Jar, SS, Clear, 6Oz, Phen, P / Pv This listing is for Case of 24
Containers molded of white opaque polypropylene. Lightweight containers are not considered leak-proof. Many laboratory and industrial uses. Supplied with polypropylene screw closures. Ma x imum temperature polypropylene is 121ºC. Jars PP White 16 Oz This listing is for Case of 36
(This is the suggested replacement for 6888-140) These 140mm diameter PYREX® bell jars are made from specially selected mold-blown blanks. The bottom flange has a finely ground finish to assure tight sealing with ground glass plates. The knob on top provides a convenient handle for lifting the jars. They are rated at 1-atmosphere of vacuum. Warning: Do not use with heat or pressure applications.
These bell jars are made from specially selected mold-blown blanks. The bottom flange has a finely ground finish to assure tight sealing with ground glass plates. Rated 1-Atmosphere Vacuum. Do not use with heat or pressure applications.
(This is the suggested replacement for 6888-222 These 222mm diameter PYREX® bell jars are made from specially selected mold-blown blanks. The bottom flange has a finely ground finish to assure tight sealing with ground glass plates. The knob on top provides a convenient handle for lifting the jars. They are rated at 1-atmosphere of vacuum. Warning: Do not use with heat or pressure applications.
These specially blown, sturdy, approximately 12.3L PYREX® round bottom bell jars have a fine ground finish at the open end. The jar is supplied without a bottom rim flange. The flat ground bearing surface has a contact area equal to the wall thickness at the open end of the jar. -Warning: do not use with heat, pressure or vacuum applications.
These specially blown, sturdy, approximately 22.7L PYREX® round bottom bell jars have a fine ground finish at the open end. The jar is supplied without a bottom rim flange. The flat ground bearing surface has a contact area equal to the wall thickness at the open end of the jar. Warning: do not use with heat, pressure or vacuum applications.