Labconco - 5255500 - AtmoSense Oxygen Monitor, 0 - 1000 ppm, 100-115V, 50/60Hz

ITEM #: 9375906
For use with Atmospure Re-Gen Gas Purifiers compatible with Protector & Precise Controlled Atmosphere Glove Bo x es
The AtmoSense O x ygen and Moisture Monitors connect in-line between the Protector Controlled Atmosphere or Combination Glove Bo x or the Precise Controlled Atmosphere Glove Bo x and the AtmosPure Re-Gen Gas Purifier. They provide digital readouts of ultra-low concentrations of o x ygen or moisture in ppm. Unlike other monitors that must be located inside the glove bo x where space is limited, these monitors may be located outside the bo x .
AtmoSense O x ygen Monitor
For general purpose trace o x ygen detection as low as 1 ppm. Provides a digital LCD readout from 0-1, 000 ppm o x ygen with resolution accuracy of 0.1 ppm from 0 to 200 ppm and a resolution accuracy of 1 ppm from 200 to 1, 000 ppm. Includes certificate of initial calibration between 90-199 parts per million. Equipped with three user-configurable o x ygen alarm levels and three relays. Provided with 4-20 mA output signal with 0-5 volts output signal for transmission of live data to a user-supplied personal computer. Durable glacier white powder- coated housing. Gas inlet and outlet connections are 3/4" brass compression fittings. Dimensions: 10.0" w x 17.0" d x 11.25" h (25.4 x 43.2 x 28.6 cm). Designed for placement atop the transfer chamber of a Labconco Protector or Precise Glove Bo x and to operate in-line with the AtmosPure Re-Gen Gas Purifier. Requires Circulation Tubing Kit 5441808 (Order separately. See below.) With 12 VDC input voltage for operation on 50/60 Hz powered from 100, 115 or 208/240 volt AC. Includes 100-115 volt cord with IEC 320 C14 plug. Shipping weight 20 lbs. (9 kg).
AtmoSense Moisture Monitor
For general purpose trace moisture detection as low as 0-20 ppm. Provides a digital LCD readout from 0-12, 310 ppm moisture (0-52% RH) with resolution accuracy of 5 ppm (2° C dew point) measured at 20 ppm (-60° C dew point). Includes certificate of initial calibration. An analog output signal of 0-5 volts is provided from -50° C to +10° C dew point (64 to 12, 310 ppm). Auto-calibration occurs every 30 minutes and is integrated between 20-1, 250 parts per million. Durable glacier white powder-coated housing. Gas inlet and outlet connections are 3/4" brass compression fittings. Dimensions: 10.0" w x 17.0" d x 11.25" h (25.4 x 43.2 x 28.6 cm). Designed for placement atop the transfer chamber of a Labconco Protector or Precise Glove Bo x and to operate in-line with the AtmosPure Re-Gen Gas Purifier. Requires Circulation Tubing Kit 5441808 (Order separately. See below.) With 12 VDC input voltage for operation on 50/60 Hz powered from 100, 115 or 208/240 volt AC. Includes 100-115 volt cord with IEC 320 C14 plug for North America/Japan use. Shipping weight 20 lbs. (9 kg).
Circulation Tubing Kit
Two each sections of 3/4" ID fle x ible neoprene tubing with 3/4" OD brass fittings on each end and brass fittings. Shipping weight 20 lbs. (9 kg).
AtmoSense Oxygen Monitor, 0 - 1000 ppm, 100-115V, 50/60Hz
This listing is for Each