Image is an illustration, may not reflect the exact product sold.


Other products by Liquidynamics

Liquidynamics - 33115-S2MG - Electric Operated Drum Pump, Metered Dispensing with Manual Shut-Off, 12V DC, 1/10 hp Motor HP

  • MFR SKU: 33115-S2MG
  • ITEM #: 8918483
  • 0 Reviews / 0 Questions
$1,858.56
Stock Status: SHIPS SOON (reserve your unit today)

ITEM #: 8918483
Diesel exhaust fluid (DEF) stationary electric drum pumps are used specifically with DEF to maintain purity when filling the reservoir of a diesel engine's Selective Catalytic Reduction (SCR) system. These pumps are certified to ISO standards that regulate the handling, transportation, and storage of DEF. They are used for dispensing and transferring moderate to large volumes of DEF when servicing late model trucks and SUVs as well as SCR-based stationary industrial systems that operate on diesel...
ITEM #: 8918483
Diesel exhaust fluid (DEF) stationary electric drum pumps are used specifically with DEF to maintain purity when filling the reservoir of a diesel engine's Selective Catalytic Reduction (SCR) system. These pumps are certified to ISO standards that regulate the handling, transportation, and storage of DEF. They are used for dispensing and transferring moderate to large volumes of DEF when servicing late model trucks and SUVs as well as SCR-based stationary industrial systems that operate on diesel fuel.
This listing is for each.
Read More >>

Liquidynamics - 33115-S2MG - Electric Operated Drum Pump, Metered Dispensing with Manual Shut-Off, 12V DC, 1/10 hp Motor HP

  • Item #: 8918483
  • MFR SKU: 33115-S2MG
  • Technical Specification
  • Item Electric Operated Drum Pump
  • Pump Package Type Metered Dispensing with Manual Shut-Off
  • Rated Voltage 12V DC
  • Full Load Amps 22.0
  • Number of Phases 1
  • Motor HP 1/10 hp
  • Motor RPM 2, 600 RPM
  • Motor Enclosure IP55
  • Motor Type 2 Pole
  • Explosion Proof No
  • Housing Material - Pumps Polypropylene
  • Max. Flow Rate 8 gpm
  • Max. Outlet Pressure 23 psi
  • Max. Viscosity 10 cps
  • Max. Oil Flow 8 gpm
  • Duty Cycle Intermittent
  • Max. Head - Pumps 48 ft
  • Max. Head Pressure 23 psi
  • Min. Fluid Temp. 17 Degrees F
  • Max. Fluid Temp. 104 Degrees F
  • For Container Size 55 gal, 275 gal, 330 gal
  • For Container Type Drum, Tote
  • Seal Material EPDM
  • Variable Speed No
  • Noise Level 70 db
  • Power Source Electric
  • Compatible Chemicals Acetic Acid 20%, Ammonium Hydroxide, Antifreeze (Coolant), Citric Acid 50%, DEF, Deionized Water, Ethyl (Ethanol), Ethylene Glycol, Formaldehyde, Formaldehyde 40%, Fresh Water, Glycerin, Isopropyl (Isopropanol), Potassium Hydroxide (50%), Salt Water, Sodium Bicarbonate (10%), Sodium Bisulfite, Sodium Hypochlorite/Bleach (to 20%)
  • Not Recommended Chemicals Acetic Acid (Glacial), Acetic Acid 80%, Acetone, Ammonia (Liquids), Anhydrous Ammonia, Automatic Transmission Fluid, Biodiesel, Brake Fluid, Calcium Chloride, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 5%, Chromic Acid 50%, Cyclohexane, Diesel Fuel, E85, Ethyl Acetate, Fertilizers, Formic Acid, Fungicides, Gasoline, Heptane, Herbicides, Hexane, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Hydrazine, Hydrochloric/Muriatic Acid (100%), Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Kerosene, Lacquer Thinners, Lithium Grease, Methyl (Methanol), Methyl Chloride, Methyl Ethyl Ketone (MEK), Motor Oil, Naphtha, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Paint, Paint Thinner, Pesticides, Phosphoric Acid (40% Solution), Sodium Bisulfate, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Stoddard Solvent (Mineral Spirits), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Sulfuric Acid (to 10%), Toluene, Trichlorethylene (50%), Turpentine, Windshield Washer Fluid, Xylene
  • Includes Suction Tube Yes
  • Suction Tube Material EPDM
  • Suction Tube Length 48 in
  • Suction Tube ID 3/4 in
  • Suction Tube OD 1 in
  • Includes Discharge Hose Yes
  • Hose Length 12 ft
  • Hose Tube Material EPDM
  • Hose Cover Material Thermal Plastic
  • Hose Inside Dia. 3/4 in
  • Hose Outside Dia. 1 in
  • Includes Nozzle Yes
  • Nozzle Material Poly
  • Nozzle Operation Manual
  • Metered Yes
  • Includes Spout Yes
  • Spout Discharge Size 3/4 in
  • Spout Connection Type Integral to Nozzle
  • Spout Length 3 in
  • Spout Material 316 Stainless Steel
  • Discharge Tube Outlet ID 3/4 in
  • Discharge Tube Outlet OD 1 in
  • Discharge Connection Type Hose Barb
  • Includes Bung Adapter No
  • Pump Connection OD 1 in
  • Pump Connection Type Hose Barb
  • Cord Length 18 ft
  • Plug Type Spring Clamp
  • Height Above Container 12 in
  • Overall Length 40 in
  • Runs Dry Yes
  • Self-Priming Yes
  • Agency Compliance ISO
  • Diesel Exhaust Fluid Compatible Yes
  • Food Grade No
  • Includes Digital Turbine Meter, Nozzle Drip/Holder, Spring loaded SS Drum Mounting Bracket, SS Automatic Nozzle
  • For Use With Anti-Freeze, Clean Water, Diesel Exhaust Fluid
  • Wetted Materials EPDM, Polypropylene, Stainless Steel
  • For Media Type Acetic Acid, Ammonium Hydroxide, Antifreeze, Bleach, Citric Acid, DEF, Ethanol, Ethylene Glycol, Formaldehyde, Glycerin, Isopropanol, Potassium Hydroxide (50%), Sodium Bicarbonate, Sodium Bisulfite, Water
  • Nominal Voltage 12V DC
  • This item is restricted for conveying or dispensing water for potable use (human consumption) in states that require 3rd party certification of compliance with the “ Safe Water Drinking Act” (CA, LA, MD, VT).

There are no questions about this product yet. Be the first to ask a question.

0 out of 5 stars
5 Star
0 %
4 Star
0 %
3 Star
0 %
2 Star
0 %
1 Star
0 %

Review this product

Tell us about your personal experience

Recently Viewed Items