March Pumps - 0157-0008-0100 - March TE-8C-MD 230/460 VAC Magnetic Drive Centrifugal Pump 0157-0008-0100

ITEM #: 17821803
Series 8
Liters per minute (LPM) and Meters (M) are given when run at 50HZ, except when pump is equipped with Air or DC motors.
TE-8C-MD 3PH 3HP Phase Magnetic Drive Pump
March Pump's industrial TE-8C-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 120 gallons per minute at 30 feet, and its maximum head is 95 Feet (or around 41PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, carbon filled Kynar (PVDF), Viton, Teflon/Ryton/Carbon, and Ceramic. The inlet connection is 2 inch male pipe thread, and the outlet is 1.5 inch male pipe thread. The standard motor is a 3 Phase 230/460V 3 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-8C-MD centrifugal magnetic drive pump is capable of handling mildly, or highly corrosive chemicals, acids, and determine if the March TE-8C-MD is suitable for your application, please contact March Pump.
Options
O-Ring: Viton, Teflon Encapsulated Viton, or Ethylene Propylene
Front and Rear Thrust Washer: Ceramic or Hastelloy
Shaft: Ceramic or Hastelloy
Imp. Bushing: Carbon, Mica Teflon, or Ryton/Teflon/Carbon
Motor Bracket: Cast Iron or Plastic
Ryton Rear Housing Available
Perfect for Applications Including
Applications for the TE-8C-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, deionized water systems, scrubber systems, detergent mixers, computer cooling, waste treatment plants, and plating operations.
Great for Chemicals Including
The TE-8C-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium
Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The TE-8C-MD may have been modified to handle these chemicals. Please contact March Pump to review your application before using the TE-8C-MD for any of the above listed chemicals. Chemical Resistance Chart