Image is an illustration, may not reflect the exact product sold.


Other products by Merck

Merck - 1008491000 - Toluene For Gas Chromatography Ms Suprasolv, 1 L

  • MFR SKU: 1008491000
  • ITEM #: 19003751
  • 0 Reviews / 0 Questions
$142.95
Stock Status: SHIPS SOON (reserve your unit today)
Average lead time for this brand: 2-3 weeks. Specific products may vary.

ITEM #: 19003751
Formula: C6H5CH3
CAS No.: 108-88-3
pH: (H2O) not applicable
Solubility: 0.52 g/l (20°C)
Melting Point: -95°C
Molar Mass: 92.14 g/mol
Boiling Point: 110.6°C (1013 hPa)
Vapor Pressure: 29 hPa (20°C)
Flash Point: 4°C
Refractive Inde x : 1.4968 (20°C)
E x plosion Limit: 1.2 - 8 %(V)
Density: 0.87 g/cm3 (20°C)
Ignition Point: 535°C
Viscosity Kinematic: 0.7 mm2/s (20°C)
Hill Formula:...
ITEM #: 19003751
Formula: C6H5CH3
CAS No.: 108-88-3
pH: (H2O) not applicable
Solubility: 0.52 g/l (20°C)
Melting Point: -95°C
Molar Mass: 92.14 g/mol
Boiling Point: 110.6°C (1013 hPa)
Vapor Pressure: 29 hPa (20°C)
Flash Point: 4°C
Refractive Inde x : 1.4968 (20°C)
E x plosion Limit: 1.2 - 8 %(V)
Density: 0.87 g/cm3 (20°C)
Ignition Point: 535°C
Viscosity Kinematic: 0.7 mm2/s (20°C)
Hill Formula: C7H8
pH Range : (H2O) not applicable
This listing is for Each
Read More >>

Merck - 1008491000 - Toluene For Gas Chromatography Ms Suprasolv, 1 L

  • Item #: 19003751
  • MFR SKU: 1008491000
  • Catalogue Number 100849
  • Synonyms Toluene, Methylbenzene, Toluol
  • Overview SupraSolv® MS is dedicated for use in gas chromatography coupled with mass spectrometric detection. SupraSolv® solvents offer the largest specified retention time range, a clear baseline and a minimal signal-to-noise ratio leading to reliable and reproducible analysis results.
  • CAS number 108-88-3
  • EC index number 601-021-00-3
  • EC number 203-625-9
  • Hill Formula CH
  • Chemical formula CHCH
  • Molar Mass 92.14 g/mol
  • HS Code 2902 30 00
  • Structure formula Image
  • Quality Level MQ100
  • Application Toluene for gas chromatography MS SupraSolv®. CAS No. 108-88-3, EC Number 203-625-9.
  • Boiling point 110.6 ° C (1013 hPa)
  • Density 0.87 g/cm3 (20 ° C)
  • Explosion limit 1.1 - 7.1 %(V)
  • Flash point 4 ° C
  • Ignition temperature 535 ° C
  • Melting Point -95 - -93 ° C
  • Vapor pressure 30.88 hPa (21.1 ° C)
  • Viscosity kinematic 0.7 mm2/s (20 ° C)
  • Solubility 0.52 g/l
  • Hazard Pictogram(s)
  • Hazard Statement(s) H225: Highly flammable liquid and vapour.
  • H304: May be fatal if swallowed and enters airways.
  • H315: Causes skin irritation.
  • H336: May cause drowsiness or dizziness.
  • H361d: Suspected of damaging the unborn child.
  • H373: May cause damage to organs through prolonged or repeated exposure.
  • H412: Harmful to aquatic life with long lasting effects.
  • Precautionary Statement(s) P202: Do not handle until all safety precautions have been read and understood.
  • P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • P273: Avoid release to the environment.
  • P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor.
  • P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.
  • P331: Do NOT induce vomiting.
  • P403 + P233: Store in a well-ventilated place. Keep container tightly closed.
  • Signal Word Danger
  • RTECS XS5250000
  • Storage class 3 Flammable liquids
  • WGK WGK 3 highly hazardous to water
  • Disposal 1
  • Strongly contaminated halogen-free organic solvents: container A.
  • Categories of danger highly flammable, irritant, harmful, toxic for reproduction
  • Storage Store at +2° C to +30° C.
  • Declaration (railroad and road) ADR, RID UN 1294 , 3, II
  • Declaration (transport by air) IATA-DGR UN 1294 , 3, II
  • Declaration (transport by sea) IMDG-Code UN 1294 , 3, II
  • Purity (GC) ≥ 99.8 %
  • Identity (IR) conforms
  • Evaporation residue ≤ 3.0 mg/l
  • Water ≤ 0.03 %
  • Color ≤ 10 Hazen
  • GC/MSD (retention range n-undecane to n-tetracontane, scaning area 30 - 600 amu, individual signals (n- tetradecane standard)) ≤ 3 ng/ml
  • Suitable for residue analysis.
  • Recommended for analysis of polychlorinated Dibenzodioxins and polychlorinated Dibenzofurans (PCDD/F).

There are no questions about this product yet. Be the first to ask a question.

0 out of 5 stars
5 Star
0 %
4 Star
0 %
3 Star
0 %
2 Star
0 %
1 Star
0 %

Review this product

Tell us about your personal experience

Recently Viewed Items