Image is an illustration, may not reflect the exact product sold.

Merck - 1.00681.5000 - SUCCINIC ACID CRYSTALS (Each)

Name: Merck - 1.00681.5000 - SUCCINIC ACID CRYSTALS (Each)
SKU: 1.00681.5000
Price: 839.0 USD
Availability: InStock

Lists At: $1,069.23 You Save: $230.23

$839.00

Stock Status: SHIPS SOON (reserve your unit today)
Average lead time for this brand: 2-3 weeks. Specific products may vary.

ITEM #: 9362176
Succinic Acid, Extra Pure, NF Grade, 99.0G100.5% (by acidimetry).^
This listing is for Each

Catalogue Number 100681
Synonyms Butanedioic acid
Succinic acid
CAS number 110-15-6
EC number 203-740-4
Grade ChP, NF, JPE, ACS
Hill Formula CHO
Chemical formula HOOCCHCHCOOH
Molar Mass 118.09 g/mol
HS Code 2917 19 80
Structure formula Image
Quality Level MQ500
Boiling point 235 ° C (1013 hPa)
Density 1.57 g/cm3 (25 ° C)
Ignition temperature 470 ° C
Melting Point 188 ° C
pH value 2.7 (10 g/l, HO, 20 ° C)
Bulk density 940 kg/m3
Solubility 58 g/l
LD 50 oral LD50 Rat 2260 mg/kg
Hazard Pictogram(s)
Hazard Statement(s) H318: Causes serious eye damage.
Precautionary Statement(s) P280: Wear eye protection/ face protection.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Signal Word Danger
RTECS WM4900000
Storage class 10 - 13 Other liquids and solids
WGK WGK 1 slightly hazardous to water

Disposal 3
Relatively unreactive organic reagents should be collected in container A. If halogenated, they should be collected in container B. For solid residues use container C.
Categories of danger irritant
Storage Store at +2° C to +30° C.
Assay (alkalimetric) 99.0 - 100.5 %
Assay (HPLC) 99.0 - 100.5 %
Identity (IR) passes test
Identity (HPLC) passes test
Identity (wet chemistry) passes test
In water insoluble matter ≤ 0.01 %
Melting range (lower value) ≥ 185.0 ° C
Melting range (upper value) ≤ 190.0 ° C
Melting point 185.0 - 190.0 ° C
Chloride (Cl) ≤ 0.001 %
Phosphate (PO) ≤ 0.001 %
Sulfate (SO) ≤ 0.003 %
Heavy metals (as Pb) ≤ 0.0020 %
Heavy metals (as Pb) (ACS) ≤ 5 ppm
Nitrogen compounds (as N) ≤ 0.001 %
Fe (Iron) ≤ 5 ppm
As (Arsenic) ≤ 0.00015 %
Substances reducing permanganate conforms
Residual solvents (ICH Q3C) excluded by production process
Sulfated ash (600° C) ≤ 0.02 %
Elemental impurity specifications have been set considering ICH Q3D (Guideline for Elemental Impurities). Class 1-3 elements are not likely to be present above the ICH Q3D option 1 limit, unless specified and indicated (*).
Corresponds to ChP, NF, JPE, ACS

Add Question

Tell us about your personal experience

Write a review