Image is an illustration, may not reflect the exact product sold.

Merck - 8439491000 - Cyclopentyl methyl ether

Name: Merck - 8439491000 - Cyclopentyl methyl ether
SKU: 8439491000
Price: 231.5 USD
Availability: InStock

$231.50

Stock Status: SHIPS SOON (reserve your unit today)
Average lead time for this brand: 2-3 weeks. Specific products may vary.

ITEM #: 7169397
Cyclopentyl methyl ether (stabilised) for synthesis. CAS 5614-37-9, molar mass 100.16 g/mol.
This listing is for 1 l Glass bottle

Catalogue Number 843949
CAS number 5614-37-9
Hill Formula CHO
Molar Mass 100.16 g/mol
Structure formula Image
Quality Level MQ200
Application Cyclopentyl methyl ether (stabilised) for synthesis. CAS 5614-37-9, molar mass 100.16 g/mol.
Density 0.86 g/cm3 (20 ° C)
Flash point 2000 mg/kg
Hazard Pictogram(s)
Hazard Statement(s) H225: Highly flammable liquid and vapour.
H302: Harmful if swallowed.
H315: Causes skin irritation.
H319: Causes serious eye irritation.
Precautionary Statement(s) P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233: Keep container tightly closed.
P240: Ground and bond container and receiving equipment.
P301 + P312: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.

P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P403 + P233: Store in a well-ventilated place. Keep container tightly closed.
Signal Word Danger
Storage class 3 Flammable liquids
WGK WGK 2 obviously hazardous to water
Disposal 1
Strongly contaminated halogen-free organic solvents: container A.
Categories of danger highly flammable, harmful, irritant, dangerous for the environment
Storage Store below +30° C.
Declaration (railroad and road) ADR, RID UN 3271 , 3, II
Declaration (transport by air) IATA-DGR UN 3271 , 3, II
Declaration (transport by sea) IMDG-Code UN 3271 , 3, II
Assay (GC, area%) ≥ 99.0 % (a/a)
Density (d 20° C/ 4° C) 0.862 - 0.864
Water (K. F.) ≤ 0.50 %
Peroxide (as HO) ≤ 0.05 %
Identity (IR) passes test
The material is stabilised with Butylhydroxytoluene (BHT).
At time of analytical testing a content of >10 ppm stabiliser was determined.

Add Question

Tell us about your personal experience

Write a review