Merck - CVDI01TPS - Durapore CVDI Cartridge Filter 10in. 0.22µm Code 0 Silicone

ITEM #: 11558763
Catalogue Number CVDI01TPS
Trade Name

• Durapore ®

Durapore ® CVDI Cartridge Filter 10 in. 0.22 µm Code 0 Silicone
Device Configuration Cartridge
Maximum Differential Pressure, bar (psid) Forward: 5.5 bar (80 psid) @ 25 °C; 1.7 bar (25 psid) @ 80 °C; 0.35 bar (5 psid) @ 135 °C. Reverse: 3.5 bar (50 psid) @ 25 °C, intermittent
Cartridge Code Code 0 (2-222) O-rings
Good Manufacturing Practices These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Quality Level MQ400
Media Durapore ®
Sterility Other
Bacterial Retention Samples of the Durapore® membrane used in this cartridge were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10 CFU/cm² using ASTM ®  F838 methodology.
Wettability Hydrophilic
Pore Size 0.2 µm
Air Diffusion at 23 °C ≤13.3 mL/min @ 2.75 bar (40 psig) in water
Bubble Point at 23 °C ≥3100 mbar (45 psig) air with water
Gravimetric Extractables The extractables level was equal to or less than 25 mg per 10-inch cartridge after 24 hours in water at controlled room temperature.
Indirect Food Additive All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. All component materials meet the requirements of the EU framework regulation [1935/2004/EC] regarding materials and articles intended to contact food.
Non-Fiber Releasing This product was manufactured with a Durapore ® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Cartridge Nominal Length 10 in. (25 cm)
Diameter 6.9 cm (2.7 in.)
Filtration Area 0.69 m²
Device Size 10 in.
Chemistry

• Polyvinylidene Fluoride (PVDF)

Device Material

• Polypropylene

Seal Material Silicone (SI)
Support Material Polypropylene
Material Size 1