Merck - CWL671S03 - Milligard Low Protein Binding Cartridge Filter 10in. Code 7 0.5µm

ITEM #: 11559045
Catalogue Number CWL671S03
Trade Name

• Milligard ®

Milligard ® Low Protein Binding Cartridge Filter 10 in. Code 7 0.5 µm
Format Single Layer
Device Configuration Cartridge
Filter Grade Low Protein Binding Milligard ® Media
Maximum Differential Pressure, bar (psid) 3.5 bar (50 psid) @ 25 °C
Maximum Inlet Pressure, bar (psi) 3.5 bar (50 psi) @ 25 °C
Cartridge Code Code 7 (2-226) O-ring and spear
Good Manufacturing Practices These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Quality Level MQ400
Bacterial Endotoxins Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Media Milligard ® LPB
Sterilization 10 autoclave cycles or SIP @ 121 °C for 30 min
Pore Size 0.5 µm
Gravimetric Extractables The extractables level was equal to or less than 100 mg per 10-inch cartridge after a 5 L flush and 24 hours in water at controlled room temperature.
Non-Fiber Releasing This product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
USP Bacterial Endotoxins A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Cartridge Nominal Length 10 in. (25 cm)
Diameter 7.1 cm (2.8 in.)
Filtration Area 0.8 m²
Device Size 10 in.
Nominal Pore Size 0.5 µm
Chemistry

• Low Protein-Binding Mixed Cellulose Esters (MCE)

Device Material

• Polypropylene

Seal Material Silicone (SI)
Support Material Polyester
Material Size 3
Material Package Double Easy-Open bag