Image is an illustration, may not reflect the exact product sold.

Merck - KZRVA1TTT1 - Opticap XLT10 Viresolve NFR 1-1/2in. TC/TC

Name: Merck - KZRVA1TTT1 - Opticap XLT10 Viresolve NFR 1-1/2in. TC/TC
SKU: KZRVA1TTT1
Price: 4992.5 USD
Availability: InStock

$4,992.50

Stock Status: SHIPS SOON (reserve your unit today)
Average lead time for this brand: 2-3 weeks. Specific products may vary.

ITEM #: 11563132
Retrovirus removal

Opticap XLT10 Viresolve NFR 1-1/2 in. TC/TC
Device Configuration Capsule
Connections, Inlet/ Outlet 38 mm (1-1/2 in.) Sanitary Flange
Connections, Vent/ Drain 1/4 in. Hose Barb with double O-ring Seal
Maximum Differential Pressure, bar (psid) Forward: 5.5 bar (80 psid). Reverse: 3.4 bar (50 psid)
Maximum Inlet Pressure, bar (psi) 5.5 bar (80 psi) @ 23 ° C
European Pressure Equipment Directive EMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
Good Manufacturing Practices These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
T-line/ Gauge Port T-line
Quality Level MQ400
Application Retrovirus removal
Key Applications

Bacterial Endotoxins Aqueous extraction contains ≤ 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Media Viresolve ® NFR
Sterilization After wetting, may be autoclaved for 3 cycles of up to 60 min at 125 ° C, using liquid cycle, slow exhaust.
Inlet Connection Sanitary Flange
Outlet Connection Sanitary Flange

Air Diffusion at 23 ° C ≤ 16 mL/min @ 3.45 bar (50 psig) in water
Gravimetric Extractables The extractables level was equal to or less than 35 mg after a 10 minute 1.5 LPM/ft² flush and 24 hours in water at controlled room temperature.
Hold-up Volume 175 mL
Maximum Inlet Pressure (psig) 80 psig
Maximum Inlet Temperature 25 ° C
Non-Fiber Releasing This product was manufactured with a Viresolve® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
USP Bacterial Endotoxins A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Length 38 cm (15 in.)
Filtration Area 0.43 m²
Inlet to Outlet Width 15.2 cm (6.0 in.)
Process Volume 600 L– 1200 L
Device Size 10 in.
Inlet Connection Diameter 1-1/2 in.
Outlet Connection Diameter 1-1/2 in.
Chemistry

Seal Material Silicone (SI)
Support Material Polypropylene
Vent Cap Material Polypropylene (PP)
Material Size 1
Material Package Double Easy-Open bag
Oxidizable Substances Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥ 4 L

Add Question

Tell us about your personal experience

Write a review