Merck - MPHL02GH2 - Sterile Millipak-20 Filter Unit 0.45µm 1/4in. HB/HB w/bell

ITEM #: 11567928
Catalogue Number MPHL02GH2
Trade Name

• Millipak ®

Sterile Millipak ® -20 Filter Unit 0.45 µm 1/4 in. HB/HB w/bell
Device Configuration Gamma Gold Capsule
Connections, Inlet/Outlet 6 mm (1/4 in.) Hose Barb with bell
Maximum Differential Pressure, bar (psid) Forward: 4.1 bar (60 psid) @ 25 °C; 1.7 bar (25 psid) @ 80 °C; 0.35 bar (5 psid) @ 123 °C; Reverse: 0.7 bar (10 psid) @ 25 °C
Maximum Inlet Pressure, bar (psi) 5.2 bar (75 psi) @ 25 °C
Good Manufacturing Practices These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Quality Level MQ400
Bacterial Endotoxins Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Media Durapore ®
Sterility Sterile
Sterilization 3 autoclave cycles of 90 min @ 123 °C; not in-line steam sterilizable
Wettability Hydrophilic
Pore Size 0.45 µm
Inlet Connection Hose Barb
Outlet Connection Hose Barb with Bell
Bubble Point at 23 °C ≥1790 mbar (26 psig) air with water
Flow Rate 6.4 L/min @ 2.45 bar ΔP
Gravimetric Extractables The extractables level was equal to or less than 1 mg per sterilized device after a 200 mL flush and 24 hours in water at controlled room temperature.
Non-Fiber Releasing This product was manufactured with a Durapore ® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
USP Bacterial Endotoxins A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Filtration Area 100 cm²
Process Volume 10 L
Inlet Connection Diameter 1/4 in.
Outlet Connection Diameter 1/4 in.
Chemistry

• Polyvinylidene Fluoride (PVDF)

Device Material

• Polycarbonate

Support Material Polycarbonate
Vent Cap Material Polyvinylidene fluoride (PVDF)
Material Size 2
Material Package Blister
Oxidizable Substances Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥200 mL