Image is an illustration, may not reflect the exact product sold.


Other products by MuxLab

MuxLab - 500773-TX-WH - HDMI and VGA Over IP PoE Wall Plate Transmitter - UHD-4k (White)

  • MFR SKU: 500773-TX-WH
  • ITEM #: 15240479
  • 0 Reviews / 0 Questions
Lists At: $733.00 You Save: $147.00
20.05 % OFF
$586.00 & Free Shipping
Stock Status: SHIPS SOON(reserve your unit today)

ITEM #: 15240479
HDMI and VGA Over IP PoE Wall Plate Transmitter - UHD-4k (White)

MuxLab - 500773-TX-WH - HDMI and VGA Over IP PoE Wall Plate Transmitter - UHD-4k (White)

  • Item #: 15240479
  • MFR SKU: 500773-TX-WH
  • Specifications:
  • Environment: HDMI 2.0b
  • Devices: TVs, monitors, projectors supporting HDMI
  • Signal Protocal/Standard: HDMI 2.0b and HDCP 2.2
  • Video Resolution HDMI: Up to 4K @ 30Hz (4:4:4) and 4K @ 60Hz (4:2:0)
  • VGA: Up to 1920 x 1200 @ 60Hz
  • Video Bandwidth: 300MHz
  • Audio Bandwidth: 20Hz to 20KHz (2 CH)
  • Network Bandwidth: 500Mbps (Typ), up to 800Mbps (Max)
  • Network Requirement: 1G Network via PoE Ethernet Switch supporting IGMP and Jumbo Frames
  • Network Protocol: Multicast
  • Compression: JPEG2000
  • Latency: 16.7ms typ. (1 Frame), up to 33.4ms max. (2 frames )
  • PoE: IEEE 802.3af
  • Power Consumption: 3W
  • Temperature: : Operating: 32° to 104° F (0° to 40° C): Storage: -4° to 185° F (-20° to 85° C)
  • Humidity: Up to 95% non-condensing
  • Wall Plate Size: 2 Gang
  • Dimensions: 5 x 4.53 x 1.65" (127 x 115 x 42mm)
  • Weight: 1.17Lbs (0.53kg)
  • Compliance Regulatory: FCC, CE, RoHS Flammability: 94V0
  • Maximum Distance Cat5e/6: 330ft (100m) from Ethernet Switch. Note: When installed in an electrically noisy environment, an STP cable must be used. Also, cross-connection reduces the effective distance depending on the grade of twisted cable used.:Connectors
  • (1) HDMI input connector for Audio/Video
  • (1) VGA input 15-Pin DSUB connector for Video
  • (1) 3.5mm input jack for 2CH Audio
  • (1) RJ45S for Ethernet connection
  • (1) 2.1mm locking power connector, for optional use since this device supports PoE (Pd):MRJ45 Pin Configuration
  • Pin 1 ® Pin 2 (T)
  • Pin 3 ® Pin 6 (T)
  • Pin 4 ® Pin 5 (T)
  • Pin 7 ® Pin 8 (T):Power Source
  • This device supports PoE (PD), an external power supply is not included. It is intended to be powered via a PoE (PSE) Ethernet Switch. If required, an optional power supply (500993) may be purchased separately.

There are no questions about this product yet. Be the first to ask a question.

0 out of 5 stars
5 Star
0 %
4 Star
0 %
3 Star
0 %
2 Star
0 %
1 Star
0 %

Review this product

Tell us about your personal experience

Recently Viewed Items