NSi Industries - DW200B - NSI DW200B Tork 2-Channel DW Series Multivolt Advanced Time Switch; 365 or 7 Days, SPDT, 20 Amp, 120 - 208/240 - 277 Volt AC

ITEM #: 5322878
Scheduling 99 On and Off set points allow individual programs for each day of the week at a minimum 1 min apart
Holidays-1 to 24 individual dates
Daylight saving- automatic adjustment (can be omitted)
Automatic compensation scheduled ON or OFF, automatic operation then resumes leap year
Manual override until the next regularly scheduled On/Off, automatic operation then resumes
AM/PM or Military time Clock format
Power outage backup: permanent schedule retention. supercapacitor provides 7 days of real time back up
Line frequency timing accuracy
NSI Torkreg; Multivolt advanced time switch finds its application in two speed pumps and SVRS device. It is provided with two programmable contacts for independent control of pool equipment and SVR or coordinated control for two speed pumps. It can be set to 99 ON/OFF set points that allow individual programs for each day of the week at a minimum one minute apart. It features 1 - 24 individual dates for preprogrammed longer run times for heavy use times. It is featured with an automatic daylight adjustment for reduced energy cost. Time switch is provided with AM/PM clock format for convenient time reading. Time switch with permanent schedule retention has super capacitor that offer seven days of real time backup. It has line frequency for timing accuracy. It has a voltage rating of 120/208 - 240/277 VAC at 50/60 Hz and current rating and maximum power consumption of 5 VA. It operates in the temperature range of -40 to 70 deg C. Surface mountable time switch is provided with a Noryl® indoor/outdoor NEMA 3R enclosure with standard lockable hasp. It measures 9.25 Inch x 4.5 Inch x 5 Inch. Time switch has a minimum time setting of one minute and maximum time setting of seven days. When normally open, contact is rated at 30 Amps, 24 - 277 VAC for general purpose/30 Amps, 120 VAC and 20 Amps, 277 VAC for ballast/15 Amps, 120 - 277 VAC for tungsten/720 VA, 120 - 277 VAC for pilot duty application/1 hp, 120 VAC and 2 hp at 208 - 277 VAC for motor/30 Amps, 28 VDC for resistive load. When normally closed, contact is rated at 30 Amps, 24 - 277 VAC for general purpose/10 Amps, 120 VAC and 10 Amps, 277 VAC for ballast/2 Amps, 120 - 277 VAC for tungsten/720 VA, 120 - 277 VAC for pilot duty application/1 hp, 120 VAC and 2 hp at 208 - 277 VAC for motor/30 Amps, 28 VDC for resistive load. Time switch is UL listed.