NSi Industries - LC200 - NSI LC200 Tork 2-Zone Outdoor Lighting Control Time Switch; SPDT, 20 Amp, 120/240/277 Volt AC

ITEM #: 10842201
Use to control two different outdoor lighting circuits utilizing one photocell
Sign lighting can turn On at one ambient light level while parking lot lighting turns On at a different light level
Photosensor input EPC1 included
Dual outputs with independent turn-ON adjustment for Stage1 and Stage 2
Light level activation turn ON is user settable from 2 - 100 FC, independent light level adjustment for each zone
Turn off is a maximum of 2 times turn on level, built-in delay on of 30 sec to avoid reaction to lightning or headlights
Switch input: can be used with a time switch for photocell ON of two different lighting circuits at different ambient light levels, then time-of-day OFF
Contact Rating: NO: 20 Amp At 120/240 Volt AC Resistive, 12 Amp At 277 Volt AC Resistive, 20 Amp At 120 Volt AC Ballast, 6 Amp At 240/277 Volt AC Ballast, 5A At Volt AC Tungsten, 470 VA At 120/240 Volt AC Pilot Duty, 690 VA At 277 Volt AC Pilot Duty; NC: 10 Amp At 120/240 Volt AC Resistive, 10 Amp At 120 Volt AC Ballast, 3 Amp At 240/277 Volt AC Ballast, 3A At Volt AC Tungsten, 275 VA At 120/240 Volt AC Pilot Duty
NSI Torkreg; Dual stage lighting control time switch features an electronic control and an electronic light sensor interacting. It finds its application in 24 hour convenience stores, open wall parking structures, large canopies, building perimeters and atriums. It offers separate control of two lighting zones with user settable on/off light level set points. It is provided with single electronic light sensor with swivel that can be mounted up to 1000 ft from controller. It has dual outputs with independent adjustment from 2 to 100 foot-candles and two independent time-of-day inputs. Switch is designed to offer 30 seconds delay on start-up. It is featured with power-on status indicator that indicates load status for each load. It has a input voltage of VAC at 50/60 Hz and consumes a maximum power of 5 VA. It has a terminal range of 14 - 22 AWG for power supply and 18 - 22 AWG for TOD/sensor. It operates at a temperature range of -40 to 60 deg C.
Time switch is featured with a metal indoor NEMA 1 enclosure with lockable hasp for added safety. Normally open contact is rated at 20 Amps, 120/240 VAC and 12 Amps, 277 VAC for resistive load/20 Amps, 120 VAC and 6 Amps, 240/277 VAC for ballast/5 Amps, VAC tungsten/470 VA, 120/240 VAC and 690 VA, 277 VAC for pilot duty application. Normally closed contact is rated at 10 Amps, 120/240 VAC for resistive load/10 Amps, 120 VAC and 3 Amps, 240/277 VAC for ballast/3 Amps, VAC tungsten/275 VA, 120/240 VAC for pilot duty application. Lighting control is UL listed.
Tork 2 Zone SPDT Lighting Control Use to control two different outdoor lighting circuits utilizing one photocell. Sign lighting can turn ON at one ambient light level while parking lot lighting turns ON at a different light level. APPLICATIONS: 24 Hour Convenience Stores Open Wall Parking Structures Large Canopies Building Perimeters Atriums FEATURES: INPUT VOLTAGE: 120/240/277VAC, 50/60Hz OUTPUT CONTACTS: SPDT NO. OF ZONES: 2 Zones TERMINAL RANGE: Relay #12AWG- input power terminals #14-#22AWG- TOD/sensor terminals accept #18-#22AWG. POWER CONSUMPTION: 5VA Maximum OPERATING TEMPERATURE: - 40 degrees to +140 degrees F (-40 degrees C to +60 degrees C) PHOTOSENSOR INPUT: EPC1 Included. DUAL OUTPUTS: With independent turn-ON adjustment for Stage 1 and Stage 2. LIGHT LEVEL ACTIVATION: Turn ON is user settable from 2 to 100 footcandle- Independent light level adjustment for each zone. Turn OFF is a maximum of 2 times turn ON level. Built-in delay ON of 30 seconds to avoid reaction to lightning or headlights. SWITCHED INPUT: Can be used with a time switch for photocell ON of two different lighting circuits at different ambient light levels, then time-of-day OFF. ENCLOSURE: Metal Indoor NEMA 1 with lockable hasp. MANUFACTURER: Tork, UPC: 786261821119 CONTACT RATINGS: GENERAL PURPOSE: 120/240 VAC NO: 20A NC: 10A 277 VAC NO: 12A BALLAST: 120 VAC NO: 20A NC: 10A 240/277 VAC NO: 6A NC: 3A TUNGSTEN: VAC NO: 5A NC: 3A PILOT DUTY: 120/240 VAC NO: 470VA NC: 275VA 277 VAC NO: 690VA