Image is an illustration, may not reflect the exact product sold.


Other products by Panasonic

Panasonic - ENW-89841A3KF - ENW-89841A3KF - Class 2 Bluetooth v2.0 + EDR Module, 2.4Ghz - 2.48Ghz, 2.9V - 3.6V (moq 500)

  • MFR SKU: ENW-89841A3KF
  • ITEM #: 16984799
  • 0 Reviews / 0 Questions
$27.95
Stock Status: SHIPS SOON(reserve your unit today)
Average lead time for this brand: 1-2 weeks. Specific products may vary.

ITEM #: 16984799
Product Overview

The ENW-89841A3KF is a Wireless UART Interface Module used for communication between the host and PAN1322-SPP. The lines UARTTXD and UARTRXD are used for commands, events and data. The lines UARTRTS and UARTCTS are used for hardware flow control. Low power mode control of PAN1322-SPP and the host can be implemented in by using the pins and P0.0. is used by the host to allow PAN1322-SPP to enter low power mode and P0.0 is used by PAN1322-SPP to wake-up the host when...
ITEM #: 16984799
Product Overview

The ENW-89841A3KF is a Wireless UART Interface Module used for communication between the host and PAN1322-SPP. The lines UARTTXD and UARTRXD are used for commands, events and data. The lines UARTRTS and UARTCTS are used for hardware flow control. Low power mode control of PAN1322-SPP and the host can be implemented in by using the pins and P0.0. is used by the host to allow PAN1322-SPP to enter low power mode and P0.0 is used by PAN1322-SPP to wake-up the host when attention is required. Additionally, the host could hardware reset PAN1322-SPP using the RESET pins. Power is supplied to a single VSUPPLY input from which internal regulators can generate all required voltages. The UART and the GPIO's interfaces have separate supply voltages so that they can comply with host signalling.
  • Implements a single point-to-point data link to other SPP capable Bluetooth devices
  • Ultra low power design in 0.13μm CMOS
  • On-module voltage regulators
  • On-module EEPROM with configuration data
  • On-module tuned reference clock
  • Module can enter low power mode in idle state and during sniff intervals
  • AT command interface over UART with HW flows control
  • Default UART baud rate 115200bps
  • Module configuration reprogrammable for 9600-bit/s up to 3.25Mbps UART baud rate
  • JTAG for boundary scan in production test
  • -86dBm Typical receiver sensitivity
  • Secure simple pairing
  • Single point-to-point data link, role switch supported
  • Packet data mode and stream data mode supported
  • Sniff mode and sniff sub-rating is supported with above capabilities
  • 5 Trusted devices stored in EEPROM

Applications

Wireless, Communications & Networking
Read More >>

Panasonic - ENW-89841A3KF - ENW-89841A3KF - Class 2 Bluetooth v2.0 + EDR Module, 2.4Ghz - 2.48Ghz, 2.9V - 3.6V (moq 500)

  • Item #: 16984799
  • MFR SKU: ENW-89841A3KF

There are no questions about this product yet. Be the first to ask a question.

0 out of 5 stars
5 Star
0 %
4 Star
0 %
3 Star
0 %
2 Star
0 %
1 Star
0 %

Review this product

Tell us about your personal experience

Recently Viewed Items