Toll Free
1.866.636.2487
5, Ethernet, RJ45F, G703/64K CONVERTER,100-240VAC, End of Life-Notice The Patton Model 2073 KiloLink-I™ G.703/64 kbps co-directional access converter lets bridges, routers, switches, multiplexers and other WAN hardware connect to a Kilo-Stream™ or similar G.703 circuit. Supporting synchronous (600 bps to 64 kbps) or asynchronous (9600 bps to 19200 bps) DTE connections, the Model 2073 accepts Patton\"s QuikConnect™ interface modules: RS-422/530, V.35, X.21, G.703/64kbps, high speed...
20, DUAL 2085 RCK CARD W/RJ45 R CD, End of Life-Notice The Model 2084 high speed RS-232 to RS-485 interface converter supports async RS-232 data rates to 115.2 kbps over 2-wires. Passing one control signal in each direction, the Model 2084 can handle up to 50 terminal drops in a multipoint polling environment. The Model 2084 has five configuration parameters, allowing the unit to be "fine tuned" to a variety of point-to-point or multipoint applications. In addition, Silicon Avalanche Diodes provide...
3, V.35, M/34F, G703/64K CONVERTER, 100-240VAC, End of Life-Notice The Patton Model 2073 KiloLink-I™ G.703/64 kbps co-directional access converter lets bridges, routers, switches, multiplexers and other WAN hardware connect to a Kilo-Stream™ or similar G.703 circuit. Supporting synchronous (600 bps to 64 kbps) or asynchronous (9600 bps to 19200 bps) DTE connections, the Model 2073 accepts Patton\"s QuikConnect™ interface modules: RS-422/530, V.35, X.21, G.703/64kbps, high speed...
1, CopperLink-T, E1 EXTENDER, 2 pack - Universal AC power, End of Life-Notice Patton’s CopperLink-T™ Model 2113 & 2115 T1/E1 Extenders are the perfect choice for enterprises, integrators, and service providers needing to extend T1 and E1 circuits beyond their typical reach while conserving the number of wire pairs used. With the CopperLink-T™ extenders, zero configuration is required. They operate in clear-channel mode, thereby facilitating the transparent extension of data and...
2, CopperLink-T E1 Extender, Local unit, End of Life-Notice Patton’s CopperLink-T™ Model 2113 & 2115 T1/E1 Extenders are the perfect choice for enterprises, integrators, and service providers needing to extend T1 and E1 circuits beyond their typical reach while conserving the number of wire pairs used. With the CopperLink-T™ extenders, zero configuration is required. They operate in clear-channel mode, thereby facilitating the transparent extension of data and voice bearing circuits—including...
1, V.35 TO E1/FE1 CONVERTER, End of Life-Notice The Patton Model 2094 enables a multiplexer or other device presenting an E1 or Fractional E1 G.703/G.704 interface be converted to a V.35 interface. It also allows a V.35 devices to connect to a G.703/G.704 network. The 2090 is configured on internal DIP switches and can be used in either clear channel mode (supporting a single 2.048 Mbps connection) or in G.704 mode (support speeds from 64-kbps to 2.048-Mbps in 64 kbps increments).
Power Supply for stand-alone ICM type interface converters, RFI suppressed
Power Supply for stand-alone ICM type interface converters, RFI suppressed
4, X.21, DB15F, G703/64K CONVERTER, 100-240VAC, End of Life-Notice The Patton Model 2073 KiloLink-I™ G.703/64 kbps co-directional access converter lets bridges, routers, switches, multiplexers and other WAN hardware connect to a Kilo-Stream™ or similar G.703 circuit. Supporting synchronous (600 bps to 64 kbps) or asynchronous (9600 bps to 19200 bps) DTE connections, the Model 2073 accepts Patton\"s QuikConnect™ interface modules: RS-422/530, V.35, X.21, G.703/64kbps, high speed...
2, RS-232IEEE-1284 PARALL CONV, Contact us for Availability The Patton Model 2030 RS-232/423 to IEEE-1284 Bi-Directional Parallel Converter lets you connect asynchronous RS-232/423 serial hardware to a printer or other device equipped with an IEEE-1284 bi-directional parallel interface. Able to work in either Level 1 Compatible or Nibble modes (according to the IEEE-1284 Standard), the Model 2030 supports the high speeds necessary for graphics-intensive laser printer applications. The Model 2030...
Power Supply for stand-alone ICM type interface converters, RFI suppressed
Power Supply for stand-alone ICM type interface converters, RFI suppressed
Power Supply for stand-alone ICM type interface converters, RFI suppressed
14, RS-232 TO RS-485 INTERF. CONV., Special Order The Model 2084 high speed RS-232 to RS-485 interface converter supports async RS-232 data rates to 115.2 kbps over 2-wires. Passing one control signal in each direction, the Model 2084 can handle up to 50 terminal drops in a multipoint polling environment. The Model 2084 has five configuration parameters, allowing the unit to be "fine tuned" to a variety of point-to-point or multipoint applications. In addition, Silicon Avalanche Diodes provide 600...
8, RS-485 CONVTR, DB25F - DB25F, Special Order The Model 2084 high speed RS-232 to RS-485 interface converter supports async RS-232 data rates to 115.2 kbps over 2-wires. Passing one control signal in each direction, the Model 2084 can handle up to 50 terminal drops in a multipoint polling environment. The Model 2084 has five configuration parameters, allowing the unit to be "fine tuned" to a variety of point-to-point or multipoint applications. In addition, Silicon Avalanche Diodes provide 600...
7, RS-232 TO RS-485 INTERF. CONV., General Availability The Model 2084 high speed RS-232 to RS-485 interface converter supports async RS-232 data rates to 115.2 kbps over 2-wires. Passing one control signal in each direction, the Model 2084 can handle up to 50 terminal drops in a multipoint polling environment. The Model 2084 has five configuration parameters, allowing the unit to be "fine tuned" to a variety of point-to-point or multipoint applications. In addition, Silicon Avalanche Diodes provide...
15, RS-232 TO RS-485 INTERF. CONV., Special Order The Model 2084 high speed RS-232 to RS-485 interface converter supports async RS-232 data rates to 115.2 kbps over 2-wires. Passing one control signal in each direction, the Model 2084 can handle up to 50 terminal drops in a multipoint polling environment. The Model 2084 has five configuration parameters, allowing the unit to be "fine tuned" to a variety of point-to-point or multipoint applications. In addition, Silicon Avalanche Diodes provide 600...
2, RS232/RS485 CONVERTER,DB9F/RJ11, General Availability The Model 2089 is Patton\"s first high speed EIA-574 (RS-232 on a DB-9) to RS-485 interface converter. Supporting async data rates to 115.2 kbps over one or two unconditioned twisted pair, the Model 2089 passes one control signal in each direction. The Model 2089 can handle up to 50 terminal drops in a multipoint polling environment; yet it is small enough to plug directly into a DB-9 serial port...and requires no AC power or batteries for...
1, T1/FT1, CSU/DSU; 120-220 VAC, End of Life-Notice The Patton Model 2710 T1-to-V.35 interface converter-CSU/DSU connects to a 4-wire T1 circuit and plugs directly into the V.35 interface of a router, switch or multiplexer. Connecting to an unstructured T1 circuit at 1.544 Mbps, the Patton 2710 also supports n x 56/64 framed connections at data rates from 128 kbps to 1.536 Mbps. In addition, the Patton 2710 may be used in pairs in point-to-point applications, where it is able to connect two V.35...
4, MINI ASYNC. LINE DRIVER W-PROTECTION, End of Life-Notice The Model 1000 async short range modem plugs directly into a DB-25 RS-232 port and support distances up to 17 miles (27.4 Km) on 19 AWG at 1200 bps over two unconditioned twisted pairs. Operating at data rates up to 19.2 kbps, this cost saving device does not require AC power or batteries to operate. The Model 1000 is DCE/DTE switchable, and is compatible with the Patton Model 1009 and 1015. The Model 1000S incorporates 600 Watts per wire...
3, T1/FT1, CSU/DSU; 120-220 VAC, End of Life-Notice The Patton Model 2710 T1-to-V.35 interface converter-CSU/DSU connects to a 4-wire T1 circuit and plugs directly into the V.35 interface of a router, switch or multiplexer. Connecting to an unstructured T1 circuit at 1.544 Mbps, the Patton 2710 also supports n x 56/64 framed connections at data rates from 128 kbps to 1.536 Mbps. In addition, the Patton 2710 may be used in pairs in point-to-point applications, where it is able to connect two V.35...
4, RS-232 TO RS-485 INTERFACE CONVERTER (DB25M; TERMINAL BLOCK); 2-WIRE, Special Order The Model 2084 high speed RS-232 to RS-485 interface converter supports async RS-232 data rates to 115.2 kbps over 2-wires. Passing one control signal in each direction, the Model 2084 can handle up to 50 terminal drops in a multipoint polling environment. The Model 2084 has five configuration parameters, allowing the unit to be "fine tuned" to a variety of point-to-point or multipoint applications. In addition,...
6, RS-232 TO RS-485 INTERFACE CONVERTER (DB25M; RJ45); 2-WIRE, Special Order The Model 2084 high speed RS-232 to RS-485 interface converter supports async RS-232 data rates to 115.2 kbps over 2-wires. Passing one control signal in each direction, the Model 2084 can handle up to 50 terminal drops in a multipoint polling environment. The Model 2084 has five configuration parameters, allowing the unit to be "fine tuned" to a variety of point-to-point or multipoint applications. In addition, Silicon...
2, RS-232 TO RS-485 INTERFACE CONVERTER (DB25F; RJ11); 2-WIRE, Special Order The Model 2084 high speed RS-232 to RS-485 interface converter supports async RS-232 data rates to 115.2 kbps over 2-wires. Passing one control signal in each direction, the Model 2084 can handle up to 50 terminal drops in a multipoint polling environment. The Model 2084 has five configuration parameters, allowing the unit to be "fine tuned" to a variety of point-to-point or multipoint applications. In addition, Silicon...
3, RS-232 TO RS-485 INTERFACE CONVERTER (DB25F; RJ45); 2-WIRE, Special Order The Model 2084 high speed RS-232 to RS-485 interface converter supports async RS-232 data rates to 115.2 kbps over 2-wires. Passing one control signal in each direction, the Model 2084 can handle up to 50 terminal drops in a multipoint polling environment. The Model 2084 has five configuration parameters, allowing the unit to be "fine tuned" to a variety of point-to-point or multipoint applications. In addition, Silicon...
18, RS-232 TO RS-485 INTERF. CONV., Special Order The Model 2084 high speed RS-232 to RS-485 interface converter supports async RS-232 data rates to 115.2 kbps over 2-wires. Passing one control signal in each direction, the Model 2084 can handle up to 50 terminal drops in a multipoint polling environment. The Model 2084 has five configuration parameters, allowing the unit to be "fine tuned" to a variety of point-to-point or multipoint applications. In addition, Silicon Avalanche Diodes provide 600...
1, SERPAR CONV, DB25F/36PIN-M, Special Order Patton\"s high speed, miniature serial to parallel converters take the capabilities of our Model 2025 Series and boost them to serial data rates of 115.2 kbps! These tiny converters support auto-directional data conversion and can handle either hardware or X-On/X-Off handshaking-yet they require no AC power or batteries for operation. These converters automatically orient themselves for serial-to-parallel or parallel-to-serial data conversion. Other parameters-data...
Power Supply for stand-alone ICM type interface converters, RFI suppressed
Power Supply for stand-alone ICM type interface converters, RFI suppressed
Power Supply for stand-alone ICM type interface converters, RFI suppressed
1, SmartNode VoIP Gateway, 2FXS, 2 VoIP Calls, or 4 SIP-SIP calls (SIP b2b UA) upgradeable (max. 200), Optional SIP-TLS/SRTP; Transcoding (max. 4calls), 2x Gig Ethernet, external UI power (100?240 VAC), Available to Order; Coming Soon The SmartNode 4140 Series of VoIP Media Gateways support up to eight phone or fax calls. The SN4140 is the perfect choice for All-IP applications where either old, non-replaceable telephones have to be integrated into a UCC environment, or for good old fax devices...
2, NULL MODEM-NO HNDSHK, End of Life-Notice Data Terminals don\"t want to talk to each other! Neither do Personal Computers or serial printers! They will only talk to modems (DCEs), not to each other (DTEs). But these devices can be fooled into thinking they are connected to modems when they are not. Our Null Modem Adapters (sometimes called async. modem eliminators or cross over cables) will do the job.