Image is an illustration, may not reflect the exact product sold.


Other products by Peavey

Peavey - 3619280 - PVS-12-SUB 12 Inch Heavy Duty Vented 1000 Watt Powered Bass Subwoofer

  • MFR SKU: 3619280
  • ITEM #: 23218172
  • 0 Reviews / 0 Questions
Lists At: $899.99 You Save: $200.00
22.22 % OFF
$699.99
Stock Status: SHIPS SOON(reserve your unit today)

ITEM #: 23218172
PVS-12-SUB 12 Inch Heavy Duty Vented 1000 Watt Powered Bass Subwoofer

Peavey - 3619280 - PVS-12-SUB 12 Inch Heavy Duty Vented 1000 Watt Powered Bass Subwoofer

  • Item #: 23218172
  • MFR SKU: 3619280
  • Specifications:
  • Frequency Response, 1 meter on-axis, swept-sine in half space Environment (-6 dB): 1 meter on-axis, swept-sine in half space
  • Environment: (-6 dB): 53:Hz - 180 Hz (Crossover Control Full CW), 53 Hz - 90 Hz (Crossover Control full CCW)
  • Low Frequency range (-10 dB, half space): 48 Hz
  • Power Amp Rating: 1, 000 watts peak available power
  • Sine wave Power: 500 watts into 4 ohms (Output duration is limiter controlled)
  • Electronic Input Impedance (Nominal): Line In: 20 k ohms balanced (XLR or 1/4"), 10 k ohms unbalanced 1/4"
  • Maximum Sound Pressure Level (1 meter in half space): 122 dB SPL continuous, 125 dB SPL peak
  • Transducer Complement: 12" premium heavy-duty woofer, 2.5" voice coil, 50 oz. magnet
  • Box Tuning Frequency: 50 Hz
  • Input Connections: One combo female XLR/ 1/4" phone jack providing balanced or unbalanced operation
  • Electronic Input Impedance (Nominal): Line In: 20 k ohms balanced (XLR or 1/4"), 10 k ohms unbalanced 1/4"
  • Output Connections: Two High Pass Outputs. One Full Range Thru
  • Controls: Level: Provides Off to + 20 dB gain adjustment
  • Crossover Frequency Adjust: Adjusts electrical crossover frequency from 90 Hz to 180 Hz, in 15 discrete steps
  • Bass Enhance: Provides bass enhancement processing.
  • Polarity Switch: Provides either Normal (0 degrees) or Reversed (180 degrees) sub woofer polarity. Ground Lift Switch for input.
  • Linkwitz-Riley crossover variable from 90 Hz to 180 Hz. - Low Pass slope: 24 dB/octave
  • High Pass Output slope: 24 dB/octave
  • Infrasonic Filter Slope: 36 dB/octave
  • Nominal Amplifier Frequency Response: +0, -3 dB from 20 Hz to 20 kHz
  • Hum and Noise: Greater than 90 dB below rated power
  • THD and IM: Typically less than 0.1 %
  • Power requirements of Peavey: Nominal 160 Watts, 100-120 VAC 50-60 Hz (Domestic), 220-240 VAC 50-60 Hz (Export)
  • Enclosure Materials & Finish: Black acrylic painted enclosure with 15 mm MDF, with a full-length, black powder coated perforated steel grille. Eight rubber feet for floor use on the bottom and for on the left side
  • Dimensions (H x W x D): 21.82 in. x 14.38 in. x 20.13 in
  • Net Weight: 57 Lbs
  • Mounting Provisions: Two 1 3/8" pole mounts with M20 threaded pole for stand mounting a suitable speaker on top of the Sub, and four large rubber feet on bottom and on the side for floor use. Threaded pole is supplied with the unit

There are no questions about this product yet. Be the first to ask a question.

0 out of 5 stars
5 Star
0 %
4 Star
0 %
3 Star
0 %
2 Star
0 %
1 Star
0 %

Review this product

Tell us about your personal experience

Recently Viewed Items