RME Audio - FF 802 FS - Fireface 802 FS 24 Bit / 192 kHz 60-channel Hi-Performance USB 2.0 Audio Interface - 19 Inch - 1RU

  • MFR SKU: FF 802 FS
  • ITEM #: 24210483
new!
    • 0 out of 5 stars
    • 5 Star
      0 %
    • 4 Star
      0 %
    • 3 Star
      0 %
    • 2 Star
      0 %
    • 1 Star
      0 %
  • 0 Reviews / 0 Questions
Lists At: $2,499.00 You Save: $200.00
8.00 % OFF
$2,299.00
  • Saw It For Less?

  • Please complete this captcha to continue

Stock Status: SHIPS SOON(reserve your unit today)

  • Please complete this captcha to continue

    * Please log into your account to avoid entering this information every time.


ITEM #: 24210483
Fireface 802 FS 24 Bit / 192 kHz 60-channel Hi-Performance USB 2.0 Audio Interface - 19 Inch - 1RU

RME Audio - FF 802 FS - Fireface 802 FS 24 Bit / 192 kHz 60-channel Hi-Performance USB 2.0 Audio Interface - 19 Inch - 1RU

  • Item #: 24210483
  • MFR SKU: FF 802 FS
Technical Specs
  • Specifications:
  • Analog
  • Input: 6.3 mm TRS, electronically balanced
  • Signal to Noise ratio (SNR) @ Lo. Gain: 116 dB (AES17), 118 dBA
  • Signal to Noise ratio (SNR) @ +4 d. Bu: 115 dB (AES17), 117 dBA
  • Frequency response @ 44.1 k. Hz, -0.1 dB: 8.9 Hz - 20.4 k. Hz
  • Frequency response @ 96 k. Hz, -0.5 dB: 4.3 Hz - 45.2 k. Hz
  • Frequency response @ 192 k. Hz, -1 dB: 3 Hz - 89 k. Hz
  • Filter: Short Delay Sharp, 5 / 5 / 6 samples delay
  • THD @ -1 dBFS: < -120 dB, < 0.0001 %
  • THD+N @ -1 dBFS: < -110 dB, 110 dB ? Maximum input level: +19 d. Bu
  • Input: 6.3 mm TRS jack, electronically balanced
  • Input impedance @ 1 k. Hz: 10 k. Ohm unbalanced, 10.6 k. Ohm balanced
  • Input sensitivity switchable between Lo Gain and +4 d. Bu
  • Input level for 0 dBFS @ Lo Gain: +19 d. Bu
  • Input level for 0 dBFS @ +4 d. Bu: +13 d. Bu
  • Variable digital gain: 0 to +12 dB
  • Minimum level for 0 dBFS: +1 d. Bu, -1.2 dBV: MIDI
  • 1 x MIDI I/O via 5-pin DIN jacks
  • Galvanically isolated by optocoupled input
  • Hi-speed mode: Jitter and response time typically below 1 ms
  • Separate 128 byte FIFOs for input and output: Digital
  • AES/EBU : 1 x XLR, transformer-balanced, galvanically isolated, according to AES3-1992: High-sensitivity input stage ( 50 dB (> 1 Hz)
  • ADAT Optical : 2 x TOSLINK, format according to Alesis specification: Standard: 2 x 8 channels 24 bit, up to 48 k. Hz: Double Speed (S/MUX): 2 x 4 channels 24 bit 96 k. Hz: Quad Speed (S/MUX4): 2 x 2 channels 24 bit 192 k. Hz: Bitclock PLL ensures perfect synchronisation even in varispeed operation: Lock range: 31.5 k. Hz - 50 k. Hz: Jitter suppression: > 50 dB (> 1 Hz)
  • SPDIF optical (ADAT 1/2) : 1 x optical, according to IEC 60958: Accepts Consumer and Professional format: Lock range: 27 k. Hz - 200 k. Hz: Jitter suppression: > 50 dB (> 1 Hz)
  • Digital Outputs
  • AES/EBU : 1x XLR, transformer-balanced, galvanically isolated, according to AES3-1992: Output level Professional 4.2 Vpp, Consumer 2.4 Vpp: Format Professional according to AES3-1992 Amendment 4: Format Consumer (SPDIF) according to IEC 60958: Single Wire mode, sample rate 28 k. Hz up to 200 k. Hz
  • ADAT : 2 x TOSLINK, format according to Alesis specification: Standard: 2 x 8 channels 24 bit, up to 48 k. Hz: Double Speed (S/MUX): 2 x 4 channels 24 bit 96 k. Hz: Quad Speed (S/MUX4): 2 x 2 channels 24 bit 192 k. Hz
  • SPDIF optical (ADAT 1/2) : Format Consumer (SPDIF) according to IEC 60958: Sample rate 28 k. Hz up to 200 k. Hz
Questions & Answers

There are no questions about this product yet. Be the first to ask a question.

Add Question
0 Customer Ratings & Reviews
0 out of 5 stars
5 Star
0 %
4 Star
0 %
3 Star
0 %
2 Star
0 %
1 Star
0 %

Review this product

Tell us about your personal experience

Write a review

Recently Viewed Items