Schneider Electric - 9013GHG2J33 - Schneider Electric / Square D 9013GHG2J33 Adjustable Differential Pressure Switch; 300 psig, 1/4 Inch NPSF, 2 NC, DPST-DB, 575 Volt AC, 20 Amp

ITEM #: 23189877
Schneider Electric / Square D Pumptrol® Adjustable differential pressure switch is used to control electrically driven water pumps and air compressors. It has a 9013GH pressure sensor of size 200 psi with 50 - 70 psi setting value. Switch has rugged polypropylene cover for added durability. It has a nitrile diaphragm pressure actuator that operates from any position. It regulates between two thresholds. The four-terminal block switch is furnished with 5.261 and 10 AWG screw-clamp terminals for electrical connection. Switch has an adjustable rising pressure range of 65 - 200 psi at 20 - 40 psi approximate adjustable differential.
Switch with two NC, Form YY, DPST-DB, snap-action contact type for high conductivity. It provides cable entry through three knock-outs for 1/2-Inch conduit. It has an adjustable differential scale type for internal settings and a 0.25-Inch NPSF internal fluid connection type. Switch is compatible with 1-Phase motors rated at 1.5 kilo-Watt at 115 VAC, 3-Phase motors rated at 2.2 kilo-Watt at 115 VAC, 1-Phase motors rated at 2.2 kilo-Watt at 230 VAC, 3-Phase motors rated at 3.75 kilo-Watt at 230 VAC, 1-Phase motors rated at 3.7 kilo-Watt at 460 VAC, 3-Phase motors rated at 3.7 kilo-Watt at 460 VAC, 1-Phase motors rated at 3.7 kilo-Watt at 575 VAC and 3-Phase motors rated at 3.7 kilo-Watt at 575 VAC.
Switch operates at a rate of 10 cycles/minute and provides electrical durability of 100000 cycles at 10 cycles/minute with mechanical durability of 300000 cycles. It measures 5.4 Inch x 3.88 Inch x 3.44 Inch. It is included with a type gG, 20-Amp cartridge fuse for short circuit protection. Switch has a destruction pressure of 300 psi and gives a repeat accuracy of +/-3%. It operates and allows to store at a temperature of -33 to 257 degree Fahrenheit. Suitable for pressure control or monitoring of water pumps, compressors, agricultural/irrigation water systems, molding presses, injection molders, grinding machines, machining centers, complex and special machines. Switch is NEMA 1 and IP20 rated for use in hazardous locations. Switch is UL listed, CSA certified and meets CE/NSF ANSI standards.
Square D, PRESSURE SWITCH 575VAC 5HP G +OPTIONS, -, 0.25 inch NPSF internal conforming to UL 508, 20...40 psi, 200 psi (40...170 psi), 50...70 psi, 65...200 psi, 300 PSIG, 40 to 170 PSIG, DPST, General Purpose (Indoor), NEMA 1, Pressure Switch, Pumptrol, Screw Clamp, UL listed, CSA, control electrically driven water pumps and air compressors, fresh water (-22...257 ¦F)-air (-22...257 ¦F)