Schneider Electric - ATV312H055M2 - Schneider Electric / Square D ATV312H055M2 Altivar 312 Constant Torque Variable Speed AC Drive; 3.7 Amp, 1 Input/3 Output Phase, 3/4 hp

ITEM #: 11545899
Dimension: 2.830 Inch Width x 5.700 Inch Height
Schneider Electric / Square D Altivar 312 Constant torque variable speed AC drive is used to operate 0.75 hp power-rated asynchronous motor with supply voltage rating of 200 - 240 Volts at supply frequency range of 50/60 Hz. It has line current rating of 6.8 Amps at 200 Volts and 5.8 Amps at 240 Volts. It is rated at 3.7 Amps. It has a power rating of 3/4 hp. The 1-Phase AC drive uses sensorless flux vector type controls for adjusting AC motor speed and torque. It has a control voltage of 24 VDC and voltage rating of 208/240 VAC. It is used to drive simple machines. It measures 2.830 Inch x 5.700 Inch. Drive is provided with heat sink to use in normal environment and ventilated enclosure. Modbus and CANopen protocol standards are integrated into the drive controller for connecting industrial network. Modbus based module transmits data at a rate of 4.8 - 19.2 kbps and CANopen based module transmits data at rate of 10 kbps - 1 Mbps.
Driver has apparent power rating of 1.4 kVA for 200 Volts. It has continuous output current rating of 3.7 Amps at 240 Volts and maximum transient current rating of 5.6 Amps for about 60 seconds. Nominal switching frequency of drive is 4 kHz and output frequency rating is 0.5 - 500 Hz. It has 1- 50 variable speed levels for adjusting motor rotation. Red color LED is provided to signal drive operation and has a frame size of 4. Driver has 0.6 Nm - 0.8 N-m tightening torque terminals for accommodating 14 AWG conductors. Internal circuits of drive have supply voltage rating of 19 - 30 Volts with overload/short-circuit protection current lesser than 10 milli-Amps for safer operation.
AC Drive has adjustable PI regulator to control speed range of asynchronous motors. It is provided with EMC filter for maintaining correct working of electrical and electronic systems. It has six logic, three analog inputs and one analog, one form C and NO relay output. It has insulation resistance greater than 1 mega-Ohm at 500 VDC for safer operation. It comes with number of optional communication card for connecting multiple high performance peripherals. Drive is enclosed in IP55 enclosure that provides protection against external harsh environmental condition.
Driver has dielectric strength of 2880 VDC between control and power terminals, 2040 VDC between earth and power terminals. It has one RJ45 Modbus and CANopen connector for easy external connection. It has vibration resistant of 1 GN and shock resistance of 15 GN for consistent and reliable operation. Driver has operating temperature rating of -10 to 60 deg C, storage temperature rating of -25 to 70 deg C and works within 5 - 95% relative humidity environment. It is splashing liquid mounted. It can withstand a temperature range of 50 deg C. AC drive UL listed, CSA/CE certified, GOST approved and RoHS/NOM/EMITECH compliant.
Schneider Electric, AC HP 240V 1 PHASE, 0.55kW, 1-Phase, 208/240Vac, 3-Phase, Altivar 312, Altivar 312, IP20, Modbus-CANopen, Modbus-CANopen, simple machine, UL Listed, CSA Certified, CE Marked, single phase, variable speed drive